MT-G Datasheet, PDF (1/18 Pages) Cree, Inc – XLamp EasyWhite LEDs

Product family data sheet
Cree^® XLamp^® MT-G EasyWhite^® LEDs
Product Description
The XLamp^® MT-G EasyWhite^® LED
maximizes lumen density, eliminates
chromaticity binning and enables
luminaire and bulb manufacturers to
deliver consistent color and high‑efficacy
light output in a new, compact, multi‑die
package. XLamp MT-G EasyWhite LEDs
can reduce LED-to-LED color variation
to within a 2‑step MacAdam ellipse,
94% smaller than the total area of the
corresponding ANSI C78.377 color region.
The XLamp MT-G EasyWhite LED is the
perfect choice for lighting applications
where high luminous flux output is
required from a single, small point source.
Example applications include: LED
retrofit bulbs, commercial/retail display
spotlights, and other indoor general
illumination applications.
FEATURES
• Cree EasyWhite color temperatures
from 2700 K to 5000 K CCT
• Wide range of operating power - up
to 25 W
• 85 °C binning and characterization
• Two voltage options: 6 V, 36 V
• Low effective thermal resistance:
1.5 °C/W
• High lumen density
• Wide viewing angle: 120°
• 80-minimum CRI at 2700 K and
3000 K CCT
• 85- and 90-minimum CRI available in
2700 K and 3000 K CCT
• Electrically neutral thermal path
• RoHS and REACh compliant
• UL^® recognized component
(E349212)
Applications
• MR, PAR and other directional retrofit
bulbs
• Commercial/residential directional
lighting
• General illumination
Table of contents
Characteristics........................................ 2
Flux Characteristics, EasyWhite^® Order
Codes and Bins - 6 V............................... 3
Flux Characteristics, EasyWhite^® Order
Codes and Bins - 36 V............................. 5
Relative Spectral Power Distribution..... 7
Relative Luminous Flux vs. Junction
Temperature............................................ 7
Electrical Characteristics........................ 8
Relative Luminous Flux vs. Current........ 9
Typical Spatial Distribution................... 10
Performance Groups – Brightness...... 10
Performance Groups – Chromaticity... 11
Cree EasyWhite^® Color Temperatures
Plotted on the 1931 CIE Curve............. 12
Bin and Order Code Formats................ 12
Reflow Soldering Characteristics......... 13
Notes..................................................... 14
Mechanical Dimensions....................... 16
Tape and Reel........................................ 17
Packaging.............................................. 18
Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree^®, XLamp^® and
EasyWhite^® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL^® and the UR logo are registered trademarks of UL LLC.
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: [phone]