MLEAWT-A1-0000-000451 Datasheet, PDF (1/26 Pages) Cree, Inc – Available in white (2600 K to 8300 K CCT), 80-, 85- and 90‑CRI minimum

Cree^® XLamp^® ML-E LEDs
Product family data sheet
Product Description
The Cree XLamp ML-E LED brings
lighting-class reliability and
performance to ½-watt LEDs.
The XLamp ML-E expands Cree’s
lighting-class leadership to LED
bulbs and linear and distributed
lighting applications. With XLamp
lighting-class reliability, a wide
viewing angle, uniform light
output, and industry-leading
chromaticity binning in a 3.5-mm
X 3.5-mm package, the XLamp
ML-E LED continues Cree’s history
of segment-focused product
innovation in LEDs for lighting
applications.
The XLamp ML-E LED brings high
performance and a smooth look to a
wide range of lighting applications,
including linear lighting, LED light
bulbs, fluorescent retrofits and
retail-display lighting.
FEATURES
• Available in white (2600 K to
8300 K CCT), 80-, 85- and
90‑CRI minimum
• Available in royal blue, blue,
green, amber and red
• Available in parallel and series
Vf configurations for white and
color
• ANSI-compatible sub-bins
• Maximum drive current: 500 mA
for parallel white, 167 mA for
series white, 350 mA for parallel
royal blue, blue, green and
red, 250 mA for parallel amber,
120 mA for series blue and
green, 65 mA for series amber,
88 mA for series red
• 120° viewing angle for white,
125° viewing angle for color
• Uniform chromaticity profile
• Electrically neutral thermal path
• RoHS- and REACh-compliant
• UL-recognized component
(E349212)
Table of Contents
Characteristics............................. 2
Flux Characteristics....................... 3
Relative Spectral Power
Distribution................................. 7
Relative Luminous Flux vs.
Junction Temperature.................... 8
Relative Radiant Flux vs. Junction
Temperature................................ 9
Electrical Characteristics...............10
Relative Luminous Flux vs.
Current......................................12
Relative Radiant Flux vs. Current...14
Typical Spatial Distribution............14
Thermal Design...........................16
Reflow Soldering Characteristics....21
Notes.........................................22
Mechanical Dimensions................24
Tape and Reel.............................25
Packaging...................................26
Copyright © 2010-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree^®, the
Cree logo and XLamp^® are registered trademarks of Cree, Inc.
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: [phone]