MHD-E Datasheet, PDF (1/25 Pages) Cree, Inc – Flexible 9‑V, 18‑V or 36‑V options

Cree^® XLamp^® MHD-E LEDs
Product family data sheet
Product Description
The XLamp^® MHD-E LED is a new
generation of high‑power LED that
delivers a more effective way to achieve
low‑cost systems than mid‑power (MP)
LEDs. Built using Cree’s high‑reliability
ceramic‑package technology, the XLamp
MHD-E LED is able to operate at higher
temperatures than MP LEDs with no
reduction in rated lifetime, enabling
an impressive 60% reduction in heat
sink size and cost. Using many times
fewer LEDs than MP LEDs to achieve
the same performance, the XLamp
MHD-E LED is optimized to simplify
LED system designs for directional and
semi‑directional applications.
FEATURES
Table of Contents
• Flexible 9‑V, 18‑V or 36‑V options
Characteristics........................................... 2
• Maximum drive current: 1400 mA
Flux Characteristics, EasyWhite^® Order
(9 V), 700 mA (18 V), 350 mA (36 V) Codes and Bins - 9 V/18 V......................... 3
• Viewing angle: 115°
Flux Characteristics, EasyWhite^® Order
• Available in 70‑CRI, 80‑CRI and 90‑CRI Codes and Bins - 36 V................................ 5
options
Relative Spectral Power Distribution........ 7
• Unlimited floor life at ≤ 30 ºC/85% RH Relative Flux vs. Junction Temperature.... 7
• Reflow solderable - JEDEC
Electrical Characteristics........................... 8
J‑STD‑020C
Relative Flux vs. Current............................ 9
• Electrically neutral thermal path
Relative Chromaticity vs. Current............ 11
• RoHS and REACh compliant
Relative Chromaticity vs. Temperature... 12
• UL^® recognized component (E349212) Typical Spatial Distribution...................... 13
Thermal Design........................................ 13
Performance Groups – Luminous Flux.. 15
Performance Groups – Chromaticity...... 15
Cree’s Standard White Chromaticity
Regions Plotted on the 1931 CIE Curve.. 16
Bin and Order Code Format..................... 17
Reflow Soldering Characteristics............ 18
Notes........................................................ 19
Mechanical Dimensions.......................... 21
Electrical Configuration........................... 23
Tape and Reel........................................... 24
Packaging................................................. 25
Copyright © 2015-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree^®, XLamp^® and
EasyWhite^® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL^® and the UR logo are registered trademarks of UL LLC.
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: [phone]