MHB-B Datasheet, PDF (1/25 Pages) Cree, Inc – Flexible 9‑V, 18‑V or 36‑V options

Cree^® XLamp^® MHB-B LEDs
Product family data sheet
Product Description
The XLamp® MHB-B LED is a new high-
power LED that enables a more effective
way to lower system costs for high
lumen lighting applications, such as
high-bay, roadway and outdoor area, than
mid-power LEDs.
Leveraging key elements of Cree’s SC5
Technology™ Platform, the ceramic
MHB-B LEDs combine high light output,
high efficacy and high reliability to enable
high lumen LED designs that are not
possible with mid-power LEDs.
The MHB-B LED delivers higher LPW than
the MHB-A LED in the same 5mm x 5mm
package, allowing lighting manufacturers
to quickly increase performance for
existing MHB designs without any
additional investment.
FEATURES
Table of Contents
• Flexible 9‑V, 18‑V or 36‑V options
Characteristics............................................2
• Maximum drive current: 700 mA (9 V), Flux Characteristics, EasyWhite^® Order
350 mA (18 V), 175 mA (36 V)
Codes and Bins - 9 V...................................3
• Viewing angle: 115°
Flux Characteristics, EasyWhite^® Order
• Available in 70‑CRI, 80‑CRI and 90‑CRI Codes and Bins - 18 V.................................5
options
Flux Characteristics, EasyWhite^® Order
• Unlimited floor life at ≤ 30 ºC/85% RH Codes and Bins - 36 V.................................7
• Reflow solderable - JEDEC
Relative Spectral Power Distribution.........9
J‑STD‑020C
Relative Flux vs. Junction Temperature.....9
• Electrically neutral thermal path
Electrical Characteristics..........................10
• RoHS‑ and REACh‑compliant
Relative Flux vs. Current...........................11
• UL^® recognized component (E349212) Relative Chromaticity vs. Current.............13
Relative Chromaticity vs. Temperature....14
Typical Spatial Distribution.......................14
Thermal Design.........................................15
Performance Groups – Luminous Flux ...16
Thermal Design - Continued.....................16
Performance Groups – Chromaticity.......17
Cree’s Standard White Chromaticity
Regions Plotted on the 1931 CIE Curve...18
Bin and Order Code Formats....................19
Reflow Soldering Characteristics.............20
Notes.........................................................21
Mechanical Dimensions...........................23
Tape and Reel............................................24
Packaging..................................................25
Copyright © 2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree^®, XLamp^® and EasyWhite^®
are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL^® and the UR logo are registered trademarks of UL LLC.
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: [phone]