MHB-A Datasheet, PDF (1/28 Pages) Cree, Inc – Flexible 9‑V, 18‑V or 36‑V options

Cree^® XLamp^® MHB-A LEDs
Product family data sheet
Product Description
The XLamp^® MHB-A LED is a new
generation of high‑power LED that
delivers a more effective way to achieve
low‑cost systems than mid‑power (MP)
LEDs. Built using Cree’s high‑reliability
ceramic‑package technology, the XLamp
MHB-A LED is able to operate at higher
temperatures than MP LEDs with no
reduction in rated lifetime, enabling an
impressive 60% reduction in heat sink
size and cost. Using up to 26 times
fewer LEDs than MP LEDs to achieve
the same performance, the XLamp
MHB-A LED is optimized to simplify
LED system designs for directional and
semi‑directional applications.
FEATURES
Table of Contents
• Flexible 9‑V, 18‑V or 36‑V options
Characteristics............................................2
• Maximum drive current: 700 mA (9 V), Flux Characteristics, EasyWhite^® Order
350 mA (18 V), 175 mA (36 V)
Codes and Bins - 9 V...................................3
• Viewing angle: 115°
Flux Characteristics, EasyWhite^® Order
• Available in 70‑CRI, 80‑CRI and 90‑CRI Codes and Bins - 18 V.................................6
options
Flux Characteristics, EasyWhite^® Order
• Unlimited floor life at ≤ 30 ºC/85% RH Codes and Bins - 36 V.................................9
• Reflow solderable - JEDEC
Relative Spectral Power Distribution.......12
J‑STD‑020C
Relative Flux vs. Junction Temperature...12
• Electrically neutral thermal path
Electrical Characteristics..........................13
• RoHS and REACh compliant
Relative Flux vs. Current...........................14
• UL^® recognized component (E349212) Relative Chromaticity vs. Current.............16
Relative Chromaticity vs. Temperature....17
Typical Spatial Distribution.......................17
Thermal Design.........................................18
Performance Groups – Luminous Flux...19
Performance Groups – Chromaticity.......20
Cree’s Standard White Chromaticity
Regions Plotted on the 1931 CIE Curve...21
Bin and Order Code Formats....................22
Reflow Soldering Characteristics.............23
Notes.........................................................24
Mechanical Dimensions...........................26
Tape and Reel............................................27
Packaging..................................................28
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree^®, XLamp^® and
EasyWhite^® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL^® and the UR logo are registered trademarks of UL LLC.
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: [phone]