CXXXEZ290-SXX00 Datasheet, PDF (1/6 Pages) Cree, Inc – Cree® EZBright290™ LEDs

Cree^® EZBright290™ LEDs
Data Sheet
CxxxEZ290-Sxx00
Cree’s EZBright LEDs are the next generation of solid-state LED emitters that combine highly efficient InGaN materials
with Cree’s proprietary optical design and device technology to deliver superior value for high-intensity LEDs. The
optical design maximizes light extraction efficiency and enables a Lambertian radiation pattern. Additionally, these LEDs
are die attachable with conductive epoxy. These vertically structured, low forward voltage LED chips are approximately
100 microns in height and require only a single wire bond connection. Cree’s EZ™ LED chips are tested for conformity
to optical and electrical specifications. Applications for EZ LEDs include next-generation mobile appliances for use in
their LCD backlights and digital camera flash where brightness, subminiaturization, and low power consumption are
required. Additional applications include indoor and outdoor displays.
FEATURES
• EZBright LED Rf Performance
– 460 & 470 nm
 EZ-18™ - 18 mW min. (470 nm only)
 EZ-21™ - 21 mW min.
 EZ-24™ - 24 mW min. (460 nm only)
– 505 nm - EZ-10™ - 10 mW min.
– 527 nm - EZ-8™ - 8.0 mW min.
• Lambertian Radiation
• Conductive-Epoxy Die Attach
• Low Forward Voltage - 3.2 V Typical at 20 mA
APPLICATIONS
• LCD Backlighting
– Mobile Appliances
– Digital Still Cameras
– Monitors
• Digital Camera Flash
• LED Video Displays
• Audio Product Display Lighting
• Automotive
CxxxEZ290-Sxx00 Chip Diagram
Top View
EZBright LED
280 x 280 μm
Bottom View
Gold Bond Pad
100 μm Diameter
Die Cross Section
t = 100 μm
Backside
Metallization
Cathode (-)
Anode (+)
Subject to change without notice.

www.cree.com