CLD-DS52 Datasheet, PDF (1/11 Pages) Cree, Inc – Cree® XLamp® XQ-D LED

Cree^® XLamp^® XQ-D LED
Product family data sheet
PRODUCT DESCRIPTION
Cree XLamp XQ-D LEDs revolutionize
low-cost, high-power LEDs by
delivering lighting-class reliability
and a wider spread of light than
typical plastic packages. The XQ-
D’s innovative wide light emission
can improve the omnidirectionality
of replacement lamps, while also
reducing system cost by using
fewer LEDs.
Using Cree’s newest generation of
silicon carbide-based LED chips,
XQ-D is optimized to dramatically
lower system cost in replacement
lamp, non-directional and outdoor
area lighting applications.
FEATURES
• Cree’s smallest lighting class
LED: 1.6 X 1.6 X 1.6 mm
• Available in white, 80-minimum
CRI white, and 70-minimum CRI
cool white
• Binned at 25 °C
• 700 mA maximum drive current
• Low thermal resistance:
7.5 °C/W
• Wide viewing angle: 145°
• Reflow solderable - JEDEC
J-STD-020C compatible
• Unlimited floor life at
≤ 30 °C/85% RH
• UL-recognized component
(E349212)
Table of Contents
Characteristics.......................... 2
Flux Characteristics.................... 3
Relative Spectral Power
Distribution.............................. 4
Relative Flux vs. Junction
Temperature............................. 4
Electrical Characteristics............. 5
Thermal Design......................... 5
Relative Flux vs. Current............ 6
Typical Spatial Distribution.......... 6
Reflow Soldering Characteristics.. 7
Notes....................................... 8
Mechanical Dimensions.............. 9
Tape and Reel......................... 10
Packaging............................... 11
Copyright © 2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree^®, the Cree logo
and XLamp^® are registered trademarks of Cree, Inc.
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: [phone]