T04CO Datasheet, PDF (2/2 Pages) Communications & Power Industries, Inc. – 400W Outdoor TWT Amplifier

C-Band
OPTIONS:
• 1 RU Remote Control Panel
• Integrated 1:1 Switch
Control and Drive
• Redundant and Power
Combined Subsystems
• SSIPA with Variable
Attenuator (provides
RF Level Adjust Range
of 0 to 30 dB)
• Integral Linearizer
(Requires SSIPA option)
• Extended Frequency Range
(to 7.10 GHz)
• Additional External Receive
Band Reject Filter
(increases loss by a
minimum 65 dB up
to 4.8 GHz)
• L-Band Block Upconverter
(BUC --- requires SSIPA)
• Ethernet Interface
• Higher Operating
Temperature Limit (+60°)
• Circuit Breaker Package
(NOTE: This option is NOT
CE Compliant)
SPECIFICATIONS, T04CO Series
Electrical
Frequency
5.85 - 6.65 GHz
Output Power
TWT
Flange
400 W min. (56.02 dBm)
350 W min. (55.44 dBm)
Bandwidth
800 MHz
Gain
46 dB min. at rated power output
(70 dB with SSIPA)
52 dB min. at small signal
(75 dB with SSIPA)
Gain Stability
At constant drive and temp
Any frequency
±0.25 dB/24hr max. (after 30 min. warmup)
±1.0 dB over operating temp. range;
(±1.75 dB above 6.725 GHz for 7.1 GHz ext.
frequency option);
±0.75 dB over ±10°C
Small Signal Gain Slope
±0.02 dB/MHz max. (±0.04 dB/MHz max.
with BUC option)
Small Signal Gain Variation
0.5 dB pk-pk across any 40 MHz band;
2.5 dB pk-pk across the 800 MHz band;
4.0 dB pk-pk across the 1250 MHz band;
4.5 dB pk-pk across any 500 MHz, with
BUC option
RF Level Adjust Range
0 to 30 dB typ. (SSIPA option required)
Attenuator Step Size
0.1 dB (SSIPA option required)
Input VSWR
1.3:1 max. (1.5:1 max. with BUC option)
Output VSWR
1.3:1 max.
Load VSWR
2.0:1 max. continuous operation;
any value for operation without damage
Residual AM
-50 dBc below 10 kHz
-20[1.5 +log F (kHz)] dBc,
10 kHz to 500 kHz
-85 dBc above 500 kHz
Phase Noise
IESS-308/309
12 dB below mask (3 dB with BUC option)
phase noise continuous
AC fundamentals related -50 dBc (-33 dBc with BUC option)
Sum of spurs (370 Hz to 1 MHz) -47 dBc (-39 dBc with BUC option)
AM/PM Conversion
2.5°/dB max. for a single carrier at
7 dB below rated power (2.5°/dB max. at
3 dB below rated with linearizer)
Harmonic Output
-60 dBc at rated power
Noise and Spurious
(at rated gain)
<-150 dBW/4 kHz, 3.4 to 4.2 GHz
<-70 dBW/4 kHz, passband to 18.0 GHz
<-65 dBW/4 kHz, passband to 18.0 GHz
(with linearizer option)
<-105 dBW/4 kHz from 18.0 to 26.0 GHz
<-125 dBW/4 kHz from 26.0 to 40.0 GHz
Electrical (continued)
Intermodulation
-24 dBc max. with two equal
carriers at total output power
7 dB (4 dB with optional integral
linearizer) below rated
single-carrier output; -23 dBc
above 6.725 GHz, 7.10 GHz
extended freq. option
Group Delay
(in any 40 MHz band)
0.01 ns/MHz linear max.
0.001 ns/MHz² parabolic max.
0.5 ns pk-pk ripple max.
Primary Power
90-264 volts AC, single phase
47-63 Hz
Power Consumption
1350 W typ.
1500 W max.
Power Factor
0.95 min.
Inrush Current
200% max.
Environmental (Operating)
Ambient Temperature
Relative Humidity
Altitude
Shock and Vibration
Acoustic Noise
Heat Dissipation
Mechanical
-40°C to +55°C operating,
including solar loading;
-40°C to +75°C non-operating
100% condensing
10,000 ft. (3,048 m) with standard
adiabatic derating of 2°C/1000 ft.
(305 m), operating;
50,000 ft. (15,240 m),
non-operating
Designed for normal transportation
environment per Section 514.4
MIL-STD-810E. Designed to
withstand 20g at 11 ms (1/2
sine pulse) in non-operating
configuration.
65 dBA @ 3 ft. from amplifier
1100 W max.
Cooling
RF Input Connection
RF Output Connection
RF Output Monitor
Dimensions (W x H x D)
Weight
Forced air with integral blower
Type N female
CPR-137 G waveguide flange,
grooved with UNC 2B 10-32
threaded holes
Type N female
10.25 x 10.5 x 20.5 in.
(260 x 267 x 521 mm)
55 lbs (25.0 kg) with
no options, max.
Certificate Number: 30515
For more detailed information, please refer to the corresponding CPI Technical Description.
Note: Specifications may change without notice as a result of additional data or product refinement.
Please contact CPI before using this information for system design.
MKT 114, ISSUE 14
06/08
PDF