T03DO Datasheet, PDF (2/2 Pages) Communications & Power Industries, Inc. – 270W Outdoor TWT Amplifier

DBS-Band
SPECIFICATIONS, T03DO
Electrical
OPTIONS:
• Remote Control Panel
• Redundant and Power
Combined Subsystems
• External Receive Band
Reject Filter
• SSIPA with Variable
Attenuator (provides
RF Level Adjust Range of
0 to 30 dB)
• Integral Linearizer (requires
SSIPA option)
• Integrated 1:1 switch
control and drive
• L-Band Block Up Converter
(requires SSIPA option)
• Ethernet Interface
Frequency
Output Power
TWT
Flange
Bandwidth
Gain
Gain Stability
Small Signal Gain Slope
Small Signal Gain Variation
RF Level Adjust Range
Input VSWR
Output VSWR
Load VSWR
Residual AM
Phase Noise
AC Fundamentals Related
Sum of Spurs
AM/PM Conversion
Harmonic Output
17.3 to 18.4 GHz
270 W min. (54.31 dBm)
235 W min. (53.71 dBm)
1100 MHz
42 dB min. at rated power output
(70 dB with SSIPA);
47 dB min. at small signal
(75 dB with SSIPA)
±0.25 dB/24hr max.
(at constant drive and temp.)
±0.04 dB/MHz max.
1.0 dB pk-pk across any 80 MHz band;
3.0 dB pk-pk across the 1100 MHz band
30 dB typ.
1.3:1 max.
1.3:1 max.
2.0 max. continuous operation; any value for
operation without damage
-50 dBc below 10 kHz
-20 [1.5 +log F(kHz)] dBc,
10 kHz to 500 kHz
-85 dBc above 500 kHz
12 dB below IESS-308 continuous mask
-50 dBc
-47 dBc (370 Hz to 1 MHz)
2.5°/dB max. for a single carrier up to
7 dB below rated power (2.5°/dB max. at
4 dB below rated with linearizer)
-60 dBc at rated power
Electrical (continued)
Group Delay
(in any 80 MHz band)
0.01 ns/MHz linear max.
0.001 ns/MHz² parabolic max.
0.5 ns pk-pk ripple max.
Primary Power
90-264 VAC, single phase;
47-63 Hz
Power Consumption
1.25 kW, typ.
1.5 kW, max.
Power Factor
0.95 min.
Environmental (Operating)
Ambient Temperature -40°C to +55°C operating
(including solar loading) -40°C to +75°C non-operating
Relative Humidity
100% condensing
Altitude
10,000 ft. with standard adiabatic
derating of 2°C/1000 ft., operating;
50,000 ft., non-operating
Shock and Vibration
20 g pk, 11 msec, 1/2 sine
Acoustic Noise
65 dBA @ 3 ft. from amplifier
Mechanical
Cooling
RF Input Connection
RF Output Connection
RF Output Monitor
Dimensions (W x H x D)
Weight
Forced air with integral blower
Type SMA female
WR 62 waveguide flange,
grooved with UNC 2B 6-32
threaded holes
Type SMA female
10.25 x 10.5 x 20.5 in.
(260 x 267 x 521 mm)
54 lbs (24.6 kg) max.,
with no options
Noise and Spurious
(at rated gain)
Noise Figure
Intermodulation
<-150 dBW/4 kHz below 12.75 GHz
<-70 dBW/4 kHz from 17.3 to 18.4 GHz
<-65 dBW/4 kHz from 17.3 to 18.4 GHz
(with optional linearizer)
<-105 dBW/4 kHz from 18.9 to 26.0 GHz
<-125 dBW/4 kHz from 26.0 to 40.0 GHz
35 dB max., 10 dB with SSIPA
-24 dBc max. with two equal carriers
at total output power 7 dB (4 dB with
optional integral linearizer) below rated
single-carrier output
Mounting hardware is provided with each amplifier.
Certificate Number: 30515
For more detailed information, please refer to the corresponding CPI Technical Description.
Note: Specifications may change without notice as a result of additional data or product refinement.
Please contact CPI before using this information for system design.
MKT 156, ISSUE 9
05/08
PDF