VTS5754A Datasheet, PDF (1/1 Pages) Communications & Power Industries, Inc. – Pulsed Coupled Cavity TWT

The VTS-5754A pulsed-coupled cavity TWT covers 2.9 GHz to 3.2 GHz with 160 kW peak output power,
up to 8% duty cycle. This device has a non-intercepting grid pulsed and single stage depressed collector to
achieve 48 dB gain. This device is capable of parallel operation from a common HV power supply, phase
tracking is better than +/- 20 degrees. The long life CD coated cathode is capable of pulse width to 200 micro
seconds in this PPM focused TWT
Features
• 2.9 GHz to 3.2 GHz
• 170 kW PEAK OUTPUT POWER
• Up to 8% DUTY CYCLE
• NON-INTERCEPTING GRID PULSED
• 47 dB GAIN
• SINGLE STAGE DEPRESSED COLLECTOR
• FORCED LIQUID COOLED
• PPM FOCUSED
• COAXIAL TYPE-N- INPUT, CPR 284
WAVEGUIDE OUTPUT
Typical Operating Parameters
PARAMETER
Cathode Voltage
Cathode Current
Heater Voltage
Heater Current
Collector Voltage
Grid Bias Voltage
Grid Pulse Voltage
RF Drive Power
Pulse Width
Duty Cycle
Collector Flow Rate
Cooling Flow Rate
Collector Pressure Drop
Body Pressure Drop
Weight
Dimensions
MIN
-46
15
8
6
27
-700
600
---
---
---
---
---
---
---
---
MAX
-43
19
11
11
39
-600
1000
2.0
220
8.0
7.0
5.0
40
60
150
11 X14X 55
UNITS
kV
a
V
A
kV
V
v
W
µsec
%
Gpm
Gpm
psig
psig
lbs
inches
The values listed above represent specified limits for the product and are subject to change. The data should be used
for basic information only. Formal, controlled specifications may be obtained from CPI for use in equipment design.
For additional information on CPI MPP products contact:
CPI MPP, Coupled Cavity TWT Operation - 3120 Hansen Way, Palo Alto, CA 94303-0750
Phone: [phone], Fax: [phone], Email: [e-mail], www.cpii.com/mpp