VPW2827 Datasheet, PDF (1/2 Pages) Communications & Power Industries, Inc. – Electronic Power Conditioner for Millimeter Wave EIKs

Electronic Power Conditioner
for Millimeter Wave EIKs
CPI EPCs are designed
and tested to operate a wide
variety of CPI Extended
Interaction Klystrons and
Oscillators.
Our EPC architecture
is designed to provide
optimum protection for the
EIK and worry free operation
for the user. EIK operating
parameters are programmed
into onboard memory then
password protected.
Integration by CPI
provides worry-free service
and support for long life and
reliable operation in this easy
to use package.
Features:
• Beam Voltage
• Anode Voltage
• Collector Voltage
• Heater voltage
• Collector current
• Body Current
• Anode Current
• Heater current
• Total Power output
• External Interlock
• Prime Power
• Dimensions
• Remote EIK mounting
box
• Fault Protection
• Cooling
-4.0 to –11.0 kV
+1.0 to +6.0 kV
Virtual ground / 70% of beam voltage
-5.0 to –7.0 V
0 to 150 mA
0 to 20 mA
-0.1 to +1.0 mA
0 to 3.0 amps
1.5 kW
Inhibits High Voltage
110/220 V, 50/60 Hz 1Ø
8.72x19x24.5 inches
(Handles 1.5 inches)
Attached by 3 meter HV lead.
Size 7.7x9.7x9.7 inches
Fully protected for operating
designated CPI EIKs
Forced air using integral blower.
CPI Canada 45 River Drive. Georgetown. Ontario. Canada. L7G2J4
Phone [phone]. FAX: [phone]. OUR E-MAIL: [e-mail]