VKP-9050 Datasheet, PDF (1/2 Pages) Communications & Power Industries, Inc. – IOT Amplifier

VKP-9050 IOT Amplifier
CPI/Microwave Power Products (MPP) offers
IOT’s for particle accelerator applications. In-
tegral Cavity Inductive Output Tubes (IC IOT)
have been created by utilizing the fundamental
electrical design of our external cavity IOT used
in terrestrial UHF television broadcasting and
incorporating conventional klystron cavity and
coupling technology. The VKP-9050A is an IC IOT
that provides 90 kW CW at 500MHz. CPI also of-
fers IC IOT’s that provide 80 kW CW from 650 MHz
to 805 MHz and 30 kW CW or 90kW pulsed at 1300
MHz.
Features
• Coaxial Output Window with Alumina Ceramic
• Water-cooled collector, cavity, and coupling loop
• Air cooled input circuit and electron gun
• Compact size with “collector (water) down”
• Requires VYW-9050A (Magnet, I/P circuit, & Stand)
VKP-9050A with VYW-9050A
Frequency
Output Power
Duty
Beam Voltage
Beam Current
Drive Power
-1dB Bandwidth
Gain
Efficiency
TYPICAL OPERATING PARAMeters
500 MHz
90
kWatts
CW
---
40
kV
3.5
A
<500
Watts
2.6 MHz
>22
dB
>65%
---
VYW-9050A ELECTROMAGNET:
Main Coil Current
15-25
A
Main Coil Voltage
7.5 +3
V
IOT SIZE with ACCESSORIES:
Height
Weight
24 / 61
150 / 68
inches / cm
pounds / kg
IOT SYSTEM SIZE with ACCESSORIES:
Height
Weight
39 / 99
550 / 250
inches / cm
pounds / kg
The values listed above represent specified limits for the product and are subject to change. The data should be used for basic
information only. Formal, controlled specifications may be obtained from CPI for use in equipment design.
For information on this and other CPI products, visit our website at: www.cpii.com,
or contact: CPI MPP Division, 607 Hansen Way, Palo Alto, CA 94303
telephone: [phone]. fax: [phone] | email: [e-mail]