VKA-7934 Datasheet, PDF (1/2 Pages) Communications & Power Industries, Inc. – Klystron

cpi[
CPI Microwave Power Products’ (MPP) klystrons were the first to be used in both commercial and military satellite
communications uplinks and are now the worldwide standards for this class of operation covering C-band, X-band and
Ku-band frequencies. In 1977, MPP introduced high performance Ka-band amplifiers for earth-satellite
communications. These products, based on high reliability military products, are now available for long-life high-
performance commercial applications. MPP offers a wide variety of Ka-band products, at power levels ranging from
250 watts to 1 MW continuous wave.
The VKA-7934 Klystron product line is currently under development. Initial test of the fixed tuned klystron is
complete. Measured data for this klystron can be found on the second page. The tunable klystron will be tested by the
end of this year.
Expected Operating Parameters
Power Output
Beam Voltage
Beam Current
Frequency
Bandwidth
Tunable Bandwidth
Gain
Cooling Method
Coolant Flow Rate
Pressure Drop
Total Weight
Size
750 to 1500*
10.5
1.30
27.5 to 31.3
up to 250
1.25
40
Forced Air
1150
3
~50
10.5H x 8 x 8
*750 Watts Tunable, 1500 Watts Fixed Tuned.
Watts
kV
A
GHz
MHz (-1dB)
GHz
dB
lbs/hr
psig
lbs
inches
Outline
Features
High Power
Low Operating Voltage
Up to 125 MHz Instantaneous
Bandwidth
1 GHz Tunable and Fixed-Tuned
Options Available
Air Cooled
Rare-Earth Permanent Magnet
Focusing
For additional information on Ka-band, other CPI MPP products or a copy of our catalog-on-disk contact:
CPI/Microwave Products Division, 811 Hansen Way, Palo Alto, CA 94303-0750
Telephone: [phone], Fax: [phone], Email: [e-mail]