4CX600JB Datasheet, PDF (1/1 Pages) Communications & Power Industries, Inc. – RF linear amplifier

4CX600JB
The 4CX600JB is the lower priced version of the
highly linear 4CX600J. This type is recommended
when operation is to be Class AB1 or when extra
drive power is available for AB2 operation.
Characteristics
Plate Dissipation (Max.)
Screen Dissipation (Max.)
Grid Dissipation (Max.)
Frequency for Max. rating (CW)
Amplification Factor
Filament/Cathode
Voltage
Current
Capacitance
Input
Output
Feedthrough
Capacitance
Input
Output
Feedthrough
Cooling
Base
Air Socket
Air Chimney
Boiler
Length
Diameter
Weight
600 Watts
15 Watts
1 Watt
--- MHz
---
Oxide Coated
6.0 Volts
5.4 Amps
Grounded Cathode
50 pf
6.3 pf
.13 pf
---
--- pf
--- pf
--- pf
Forced Air
9 Pin Special
SK-607
SK-646
---
2.71 in; 68.80 mm
2.08 in; 52.8 mm
7.7 oz; 218 gm
Class of
Operation
AB1
AB1
Type of Service
RF linear amplifier
RF linear amplifier
Maximum Ratings
Typical Operation
Plate
Voltage
(Volts)
Plate
Current
(Amps)
3,000
0.60
3,000
0.60
Plate
Voltage
(Volts)
Screen
Voltage
(Volts)
Plate
Current
(Amps)
Drive Output
Power Power
(Watts) (kiloWatts)
2,000
350
0.50
---
0.550
2,800
350
0.57
---
0.975
The values listed above represent specified limits for the product and are subject to change. The data should be used for basic
information only. Formal, controlled specifications may be obtained from CPI for use in equipment design.
For information on this and other CPI products, visit our website at: www.cpii.com,
or contact: CPI MPP Division, Eimac Operation, 607 Hansen Way, Palo Alto, CA 94303
telephone: [phone]. fax: [phone] | email: [e-mail]