4CX1500B Datasheet, PDF (1/1 Pages) List of Unclassifed Manufacturers – RADIAL BEAM POWER TETRODE

4CX1500B/8660
The 4CX1500B/8660 is a low voltage, high current
tetrode specifically designed for exceptionally low
intermodulation distortion and low grid intercep-
tion. The low distortion characteristics make
the 4CX1500B/8660 especially suitable for radio
frequency and audio frequency linear amplifier
service.
Characteristics
Plate Dissipation (Max.)
Screen Dissipation (Max.)
Grid Dissipation (Max.)
Frequency for Max. rating (CW)
Amplification Factor
Filament/Cathode
Voltage
Current
Capacitance
Input
Output
Feedthrough
Capacitance
Input
Output
Feedthrough
Cooling
Base
Air Socket
Air Chimney
Boiler
Length
Diameter
Weight
1,500 Watts
12 Watts
1 Watt
110 MHz
---
Oxide Coated
6.0 Volts
10.0 Amps
Grounded Cathode
81.5 pf
11.8 pf
.02 pf
---
--- pf
--- pf
--- pf
Forced Air
Special, Breechblock
SK-800B
SK-806
---
4.80 in; 121.90 mm
3.37 in; 85.60 mm
27 oz; 0.77 kg
Class of
Operation
AB
AB1
Maximum Ratings
Typical Operation
Type of Service
RF linear amplifier
AF amplifier or modulator
Plate
Voltage
(Volts)
Plate
Current
(Amps)
3,000
0.90
3,000
0.90
Plate
Voltage
(Volts)
Screen
Voltage
(Volts)
Plate
Current
(Amps)
Drive Output
Power Power
(Watts) (kiloWatts)
2,900
225
0.71
---
1.1
2,900
325
1.7
---
2.774
The values listed above represent specified limits for the product and are subject to change. The data should be used for basic
information only. Formal, controlled specifications may be obtained from CPI for use in equipment design.
For information on this and other CPI products, visit our website at: www.cpii.com,
or contact: CPI MPP Division, Eimac Operation, 607 Hansen Way, Palo Alto, CA 94303
telephone: [phone]. fax: [phone] | email: [e-mail]