4CX10-000J Datasheet, PDF (1/1 Pages) Communications & Power Industries, Inc. – RF linear amplifier

4CX10,000J
The 4CX10,000J has a rated maximum plate dis-
sipation of 12 kW. It incorporates rugged internal
construction features including a mesh filament.
The 4CX10,000J is specifically designed for low
intermodulation distortion in radio frequency
linear amplifier service.
Characteristics
Plate Dissipation (Max.)
Screen Dissipation (Max.)
Grid Dissipation (Max.)
Frequency for Max. rating (CW)
Amplification Factor
Filament/Cathode
Voltage
Current
Capacitance
Input
Output
Feedthrough
Capacitance
Input
Output
Feedthrough
Cooling
Base
Air Socket
Air Chimney
Boiler
Length
Diameter

Weight
12,000 Watts
250 Watts
75 Watts
100 MHz
4.5
Thoriated Tungsten
7.5 Volts
103 Amps
Grounded Cathode
120.0 pf
20.5 pf
0.7 pf
Grounded Grid
56.0 pf
21.5 pf
0.1 pf
Forced Air
Special Coaxial
SK-300A
SK-1306
---
9.125 in; 231.77 mm
7.050 in;
179.07.00 mm
12.2 lb; 5.55 kg
Class of
Operation
AB1
Type of Service
RF linear amplifier
Maximum Ratings
Typical Operation
Plate
Voltage
(Volts)
Plate
Current
(Amps)
7,500
4.0
Plate
Voltage
(Volts)
Screen
Voltage
(Volts)
Plate
Current
(Amps)
Drive Output
Power Power
(Watts) (kiloWatts)
7,500 1,600
2.2
---
10
The values listed above represent specified limits for the product and are subject to change. The data should be used for basic
information only. Formal, controlled specifications may be obtained from CPI for use in equipment design.
For information on this and other CPI products, visit our website at: www.cpii.com,
or contact: CPI MPP Division, Eimac Operation, 607 Hansen Way, Palo Alto, CA 94303
telephone: [phone]. fax: [phone] | email: [e-mail]