English
Language : 

4CW50-000E Datasheet, PDF (1/1 Pages) Communications & Power Industries, Inc. – RF amplifier
4CW50,000E
The 4CW50,000E is characterized by low input
and feedback capacitances and low internal lead
inductances. A rugged mesh thoriated tungsten
filament provides adequate emission over the
long operating life. It is recommended for use as
a Class C RF amplifier or oscillator, a Class AB RF
linear amplifier, or a Class AB push-pull AF ampli-
fier or modulator. The 4CW50,000E is also use-
ful as a plate and screen-modulated Class C RF
amplifier.
Characteristics
Plate Dissipation (Max.)
Screen Dissipation (Max.)
Grid Dissipation (Max.)
Frequency for Max. rating (CW)
Amplification Factor
Filament/Cathode
Voltage
Current
Capacitance
Input
Output
Feedthrough
Capacitance
Input
Output
Feedthrough
Cooling
Base
Air Socket
Air Chimney
Boiler
Length
Diameter
Weight
50,000 Watts
1,500 Watts
400 Watts
110 MHz
4.5
Thoriated Tungsten
12.0 Volts
215 Amps
Grounded Cathode
310 pf
52.0 pf
0.7 pf
Grounded Grid
140 pf
52.0 pf
0.3 pf
Water and Forced Air
Special Coaxial
SK-2011A
---
---
11.50 in; 292.00 mm
9.53 in; 242.00 mm
35.0 lb; 15.9 kg
Class of
Operation
C
C
AB1
AB1
Maximum Ratings
Typical Operation
Type of Service
RF amplifier
RF amplifier plate modulated
RF linear amplifier
AF linear amplifier
Plate
Voltage
(Volts)
Plate
Current
(Amps)
17,500 12.0
15,000 12.0
17,500 12.0
17,500 12.0
Plate
Voltage
(Volts)
Screen
Voltage
(Volts)
Plate
Current
(Amps)
Drive Output
Power Power
(Watts) (kiloWatts)
15,000 1,500
11.5
150
137.0
14,000
750
9.2
685
110.0
10,000 1,800
9.1
---
57.0
15,000 1,250
18.6
---
195.0
The values listed above represent specified limits for the product and are subject to change. The data should be used for basic
information only. Formal, controlled specifications may be obtained from CPI for use in equipment design.
For information on this and other CPI products, visit our website at: www.cpii.com,
or contact: CPI MPP Division, Eimac Operations, 607 Hansen Way, Palo Alto, CA 94303
telephone: 1(800) 414-8823. fax: (650) 592-9988 | email: powergrid@cpii.com