4CV100-000E Datasheet, PDF (1/1 Pages) Communications & Power Industries, Inc. – RF linear amplifier

4CV100,000E
The 4CV100,000E is recommended for use as a
Class C RF amplifier, a class AB RF amplifier, a
Class AB push-pull audio amplifier or modulator,
as well as a high level modulated or pulse dura-
tion modulated amplifier. The tube is character-
ized by low input and feedback capacitances and
low internal lead inductance. A rugged thoriated
tungsten mesh filament provides ample emission
over long operating life.
Characteristics
Plate Dissipation (Max.)
Screen Dissipation (Max.)
Grid Dissipation (Max.)
Frequency for Max. rating (CW)
Amplification Factor
Filament/Cathode
Voltage
Current
Capacitance
Input
Output
Feedthrough
Capacitance
Input
Output
Feedthrough
Cooling
Base
Air Socket
Air Chimney
Boiler
Length
Diameter
Weight
100,000 Watts
1,750 Watts
500 Watts
108 MHz
4.5
Thoriated Tungsten
15.5 Volts
215 Amps
Grounded Cathode
470.0 pf
61.0 pf
1.1 pf
Grounded Grid
200 pf
61.0 pf
0.4 pf
Vapor and Forced Air
Special
SK-2011A
---
BR-710B
15.50 in; 39.37 cm
9.53 in; 24.21 cm
35.0 lb; 15.9 kg
Class of
Operation
AB1
C
C
AB1
Maximum Ratings
Typical Operation
Type of Service
RF linear amplifier
RF amplifier
RF amplifier plate modulated
RF amplifier or modulator
Plate
Voltage
(Volts)
Plate
Current
(Amps)
17,500 16.0
17,500 16.0
15,000 16.0
17,500 16.0
Plate
Voltage
(Volts)
Screen
Voltage
(Volts)
Plate
Current
(Amps)
Drive Output
Power Power
(Watts) (kiloWatts)
17,500 1,500
13.5
---
168.0
15,000
750
11.7
560
140.0
15,000
750
11.7
530
140.0
15,000 1,500
19.5
---
200.0
The values listed above represent specified limits for the product and are subject to change. The data should be used for basic
information only. Formal, controlled specifications may be obtained from CPI for use in equipment design.
For information on this and other CPI products, visit our website at: www.cpii.com,
or contact: CPI MPP Division, Eimac Operations, 607 Hansen Way, Palo Alto, CA 94303
telephone: [phone]. fax: [phone] | email: [e-mail]