4CPW1000KA Datasheet, PDF (1/1 Pages) Communications & Power Industries, Inc. – Switch tube (max regulation range 20 kV)

4CPW1000KA/9009
The 4CPW1000KA/9009 is a water-cooled power
tetrode intended for use as a pulse modulator or
in pulse regulator service. The tube is rated for
150 kVdc holdoff in a protective atmosphere, with
a 90 amperes pulse cathode curent rating during
conduction and a 1000 kilowatt anode dissipation
rating (average during pulse). Peak anode current
capability in excess of 150 ampers for short pulse
operation is practical.
Characteristics
Plate Dissipation (Max.)
Screen Dissipation (Max.)
Grid Dissipation (Max.)
Frequency for Max. rating (CW)
Amplification Factor
Filament/Cathode
Voltage
Current
Capacitance
Input
Output
Feedthrough
Capacitance
Input
Output
Feedthrough
Cooling
Base
Air Socket
Air Chimney
Boiler
Length
Diameter
Weight
1,000,000 Watts
3,500 Watts
1,500 Watts
--- MHz
4.5
Thoriated Tungsten
12 Volts
660 Amps
Grounded Cathode
770 pf
50 pf
4 pf
---
--- pf
--- pf
--- pf
Water and Forced Air
Special
---
---
---
31 in; 79.0 cm
17 in; 43.18 cm
175 lb; 80 kg
Class of
Operation
---
---
Maximum Ratings
Typical Operation
Type of Service
Switch tube (max regulation range 20 kV)
Pulse modulator
Plate
Voltage
(Volts)
Plate
Current
(Amps)
15,000
90
150,000
90
Plate
Voltage
(Volts)
Screen
Voltage
(Volts)
Plate
Current
(Amps)
Drive Output
Power Power
(Watts) (kiloWatts)
---
---
---
---
---
120,000 1,500
50
---
5.8
The values listed above represent specified limits for the product and are subject to change. The data should be used for basic
information only. Formal, controlled specifications may be obtained from CPI for use in equipment design.
For information on this and other CPI products, visit our website at: www.cpii.com,
or contact: CPI MPP Division, Eimac Operations, 607 Hansen Way, Palo Alto, CA 94303
telephone: [phone]. fax: [phone] | email: [e-mail]