RI-05 Datasheet, PDF (2/2 Pages) Coto Technology – Dry Reed Switch

RI-05 Series Dry Reed Switch
close, nor a switch kept closed by an 80 AT coil to
open.
Vibration
The switches are tested in accordance with “IEC 68-
2-6”, test Fc (acceleration 10 G; below cross-over
frequency 57 to 62 Hz; amplitude 0.75 mm; fre-
quency range 10 to 2000 Hz, duration 90 minutes in
each direction). Such a vibration will not cause an
open switch (no magnetic field present) to close, nor
a switch kept closed by an 80 AT coil to open.
Mechanical Strength
The robustness of the terminations is tested in
accordance with “IEC 68-2-21”, test Ua₁ (load 10 N).
Operating and Storage Temperature
Operating ambient temperature; min: -55°C; max:
+75°C. Storage temperature; min: -55°C; max:
+125°C. Note: Temperature excursions up to 150°C
may be permissible. For more information contact
your nearest Coto Technology sales office.
Soldering
The switch can withstand soldering heat in accor-
dance with “IEC 68-2-20”, test Tb, method 1B:
solder bath at 350 ±10°C for 3.5 ±0.5 s. Solderabil-
ity is tested in accordance with “IEC 68-2-20”, test
Ta, method 3: solder globule temperature 235°C;
ageing 1b: 4 hours steam.
Welding
The leads can be welded.
Mounting
The leads should not be bent closer than 1 mm to
the glass-to-metal seals. Stress on the seals should be
avoided. Care must be taken to prevent stray mag-
netic fields from influencing the operating and
measuring conditions.
For Most Recent Data, Consult the Coto Technology Website: www.cotorelay.com 6 E-mail: [e-mail]
129