CT10-1532-G2 Datasheet, PDF (2/2 Pages) Coto Technology – Tape and reel packaging

CT10-XXXX-G1
.115 (2.92mm)
.006 (0.15mm)
DIMENSIONS
in Inches (Millimeters)
.505 (12.8mm)
.035/.045
(.089/1.14mm)
.645 (16.4mm)
.115 (2.92mm)
.006 (0.15mm)
.095 (2.41mm)
CT10-XXXX-G4
.115 (2.92mm)
.006 (0.15mm)
.095 (2.41mm)
.040 (1.0mm)
.095 (2.41mm)
.505 (12.8mm)
.035/.045
(.089/1.14mm)
.77 (19.6mm)
.115 (2.92mm)
.040 (1.0mm)
.095 (2.41mm)
CT10-XXXX-G2
.505 (12.8mm)
.035/.045
(.089/1.14mm)
.77 (19.6mm)
.040 (1.0mm)
CT10-XXXX-A2
.619 (15.72mm)
.505 (12.8mm)
.040 (1.0mm)
ORDERING INFORMATION
A complete part number is represented by the digits to the right of the
CT10 series prefix followed by a suffix as shown below.
EXAMPLE: CT10-1030-G1 is
a CT10 sensor (10mm encapsulated switch)
with a sensitivity range from 10 to 30AT
lead ends are formed according to the G1 version
CT10-XXXX-YY
Series
CT10
Lead Configuration Subset:
G1 for Gull Wing Version 1 (16.4mm)
G2/G4 for Gull Wing Version 2 (19.6mm)
A2 for Axial
AT Range (measured after mold & lead form)
10-30; 10-40
For most recent data visit www.cotorelay.com
COTO TECHNOLOGY, INC.
page | 97