9104 Datasheet, PDF (2/2 Pages) Coto Technology – 9104 SERIES/HIGH VOLTAGE SIP REED RELAYS

MODEL NUMBER
Parameters
COIL SPECS.
Nom. Coil Voltage
Max. Coil Voltage
Coil Resistance
Operate Voltage
Release Voltage
CONTACT RATINGS
Switching Voltage³
Switching Current
Carry Current
Contact Rating
Life Expectancy-Typical¹
Static Contact
Resistance (max. init.)
Dynamic Contact
Resistance (max. init.)
RELAY SPECIFICATIONS
Insulation Resistance
(minimum)
Capacitance - Typical
Across Open Contacts
Open Contact to Coil
Dielectric Strength
(minimum)
Operate Time -
including bounce - Typical
Release Time - Typical
Test Conditions
Units
+/- 10%, 25° C
Must Operate by
Must Release by
VDC
VDC
Ω
VDC - Max.
VDC - Min.
Max DC/Peak AC Resist.
Max DC/Peak AC Resist.
Max DC/Peak AC Resist.
Max DC/Peak AC Resist.
Signal Level 1.0V, 10mA
50mV, 10mA
0.5V, 50mA
at 100 Hz, 1.5 msec
Volts
Amps
Amps
Watts
x 10⁶ Ops.
Ω
Ω
Between all Isolated Pins
at 100V, 25°C, 40% RH
Ω
No Shield
pF
No Shield
Between Contacts
Contacts to Coil
Contacts/Shield to Coil
At Nominal Coil Voltage,
30 Hz Square Wave
pF
VDC/peak AC
VDC/peak AC
VDC/peak AC
msec.
msec.
Top View:
Dot stamped on top of relay refers to pin #1 location
Grid = .1”x.1” (2.54mm x 2.54mm)
Notes:
1 _{Consult factory for life expectancy at other switching loads.}
2 _{Optional diode is connected to pin #2(+) and pin #3(-). Correct coil polarity must be observed.}
3 _{Switch current limited to 1.0mA @ 1000V.}
Environmental Ratings:
Storage Temp: -35°C to ⁺100°C; Operating Temp: -20°C to ⁺85°C; Solder Temp: 270°C max; 10 sec. max
All electrical parameters measured at 25°C unless otherwise specified.
Vibration: 20 G’s to 2000 Hz; Shock: 50 G’s
For most recent data visit www.cotorelay.com
COTO TECHNOLOGY, INC.
9104²
4 Pin SIP
5 12
6.5 15.0
175 500
3.75 9.0
0.5 1.0
1000
0.5
1.3
10
300
0.150
0.200
10¹¹
1.0
-
2000
3000
3000
0.75
0.5
1
3
5
7
page | 43