9001-05-00 Datasheet, PDF (2/2 Pages) Coto Technology – Molded SIP Reed Relays

9000 Series / Molded SIP Reed Relays
Notes:
1_{Consult factory for life expectancy at other switching}
loads.
2_{Optional diode is connected to pin #2 (+) and pin}
#3(-). Correct coil polarity must be observed.
3_{9000 series part numbers designated with Form B}
contacts, these relays contain bias magnets.
Correct coil polarity must be observed.
4_{Consists of 56V Zener diode and 1N4148 diode in}
series, connected in parallel with coil.
Top View:
Dot stamped
on relay refers
to pin #1
Grid = .1"x.1"
(2.54mm x 2.54mm)
Environmental Ratings:
Storage Temp: -35°C to ^+100°C; Operating Temp: -20°C to ^+85°C
Solder Temp: 270°C max; 10 sec. max
The operate and release voltage and the coil resistance are
specified at 25°C. These values vary by approximately
0.4% / °C as the ambient temperature varies.
Vibration: 20 G’s to 2000 Hz; Shock: 50 G’s
For Most Recent Data, Consult the Coto Technology Website: www.cotorelay.com 6 E-mail: [e-mail]
33