|
K1010T_16 Datasheet, PDF (7/11 Pages) COSMO Electronics Corporation – LOW INPUT CURRENT PHOTOCOUPLER | |||
|
◁ |
cosmo
K1010 T Series
LOW INPUT CURRENT
PHOTOCOUPLER
z Recommended Soldering Conditions
(a) Infrared reflow solderingï¼
 Peak reflow solderingï¼
260â or below (package surface temperature)
 Time of peak reflow temperatureï¼
10 sec
 Time of temperature higher than 230âï¼
30-60 sec
 Time to preheat temperature from 180~190âï¼ 60-120 sec
 Time(s) of reflowï¼
Two
 Fluxï¼
Rosin flux containing small amount of chlorine (The
flux with a maximum chlorine content of 0.2 Wt% is
recommended.)
Recommended Temperature Profile of Infrared Reflow
260â
10 sec Max.
230â
190â
180â
60-120 sec
t (s)
30-60 sec
(b) Wave solderingï¼
 Temperatureï¼
 Timeï¼
 Preheating conditionsï¼
 Time(s) of reflowï¼
 Fluxï¼
260â or below (molten solder temperature)
10 seconds or less
120â or below (package surface temperature)
One
Rosin flux containing small amount of chlorine (The flux with a maximum
chlorine content of 0.2 Wt% is recommended.)
(c) Cautionsï¼
 Fluxesï¼
Avoid removing the residual flux with freon-based and chlorine-based
cleaning solvent.
 Avoid shorting between portion of frame and leads.
Cosmo Electronics Corp.
Document No. 69P00003.3
-7-
http://www.cosmo-ic.com
|
▷ |