KPC410 Datasheet, PDF (4/7 Pages) COSMO Electronics Corporation – Super High Speed Response Photocoupler

PRODUCT SPECIFICATION
Photocoupler :
cosmo _{KPC410 ELECTRONICS CORPORATION}
DATE: 08/14/2008
NO. 61P04029 REV
SHEET 4 OF 7 2
Note ) Typical values are all at Vcc = 3.3V, Ta= 25°C
*1 Ta=0 to 70°C.
*2 Pulse width <= 1ms
*3 40 to 80%RH AC for 1 minute ,f=60HZ.
*4 At Iin =10mA, VF decreases at the rate of 1.6mV/°C if the temperature goes up.
*5 Measured as 2-pin element. Connect pins 2 and 3, connect pins 5, 6, 7 and 8.
*6 Refer to the Fig. 1.
*7 CMH represents a common mode voltage ignorable rise time ratio that can hold logic (1) state in output.
CML represents a common mode voltage ignorable fall time ratio that can hold logic (0) state in output.
●Recommmended Operating Conditions
Parameter
Low level input current
High level input current
Supply voltage
Fanout (TTL load )
Operating temperature
Symbol
Min
IFL
0
IFH
7.0
VCC
4.5
N
-
Topr
-40
Max
Unit
250
uA
15
mA
5.5
V
8
-
85
℃
Circuit Block Diagram
Anode
Vcc
Vo
GND