PRCP-R Datasheet, PDF (5/7 Pages) Copal Electronics – Polymer Resettable Circuit Protectors

PRCP-R Series Tape and Reel Specifications
Devices taped using EIA468–B/IEC286-2 standards. See table below and Figures 1 and 2 for details.
Dimension Description
IEC
Mark
EIA
Mark
Dimensions
Dimensions
Tolerance
Carrier tape width
Hold down tape width:
W
W
W0
W4
18
(.709)
11
(.433)
-0.5/+1.0
(-0.02/+.039)
min.
Hold down tape
No protrusion
Top distance between tape edges
Sprocket hole position
Sprocket hole diameter
Abscissa to plane (straight lead)
W2
W6
W1
W5
D0
D0
H
H
Abscissa to plane (kinked lead)
H0
H0
Abscissa to top (straight lead)
H1
H1
Abscissa to top (kinked lead)
H1
H1
Overall width w/lead protrusion (straight lead)
C1
Overall width w/lead protrusion (kinked lead)
C1
Overall width w/o lead protrusion (straight lead)
C2
Overall width w/o lead protrusion (kinked lead)
C2
Lead protrusion
I1
L1
Protrusion of cutout
L
L
3
(.118)
9
(.354)
4
(.157)
18.5
(.728)
16
(.63)
38.0
(1.496)
32.2
(1.268)
55.0
(2.165)
43.2
(1.7)
54.0
(2.126)
42.5
(1.673)
1.0
(.039)
11
(.433)
max.
-0.5/+0.75
(-0.02/+0.03)
±0.2
(±.0078)
±3.0
(±.118)
±0.5
(±.02)
max.
max.
max.
max.
max.
max.
max.
max.
Protrusion beyond hold-down tape
Sprocket hole pitch
Pitch tolerance
Device pitch:
PRCP-R005-PRCP-R160
Device pitch:
PRCP-R185‒PRCP-R400
Tape thickness
Tape thickness with splice:
PRCP-R010‒PRCP-R160
I2
I2
P0
P0
t
t
t1
Not specified
12.7
(0.5)
20 consecutive
12.7
(0.5)
25.4
(1.0)
0.9
(.035)
1.5
(.059)
±0.3
(±.012)
±1
(±.039)
±0.3
(±.012)
±0.6
(±.024)
max.
max.
Tape thickness with splice:
PRCP-R250‒PRCP-R1100
Splice sprocket hole alignment
Body lateral deviation
Body tape plane deviation
t1
∆_h
∆_h
∆_p
∆_p
2.3
(.091)
0
0
0
max.
±0.3
(±.012)
±1.0
(±.039)
±1.3
(±.051)
Specifications are subject to change without notice.
The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.
Customers should verify actual device performance in their specific applications.
DIMENSIONS = ^MM
(INCHES)