SP27 Datasheet, PDF (2/2 Pages) Copal Electronics – STEPPING MOTORS

SP27
STEPPING MOTORS
˙ REFERENCE SPECIFICATIONS
Item
SP27-2003
Number of phases
4
Number of poles
12
Excitation
2
Step angle
15°
Steps
24
Winding resistance
60 Ω
Power
Average power consumption 5 W maximum
Current/Phase
Pull-in torque
Pull-out torque
Refer to PERFORMANCE CURVES
Pull-in pulse rate
Maximum continuous response frequency
Rotor inertia
2 gf·cm²
Temperature rise
30 °C
Insulation resistance
30 MΩ minmum
Dielectric strength
AC500 Vrms
Operating temperature range
− 10 ~ 50 °C
Net weight
Approx. 50 g
Remarks
˞
—
at 2 phases-EX.
at 2 phases-EX.
± 10 %
—
—
Reference value
at 500 pps 2 phases-EX. DC12V
DC500 V
50 Hz, 1 min
—


˞
Connector terminal
Male connector
654321
φ 1 φ 2 φ 1C φ 2C φ 1 φ 2
Made by J.S.T. Mfg Co., Ltd
φ 1 φ 2 φ 1C φ 2C
φ1 φ2 φ1
φ 1C
φ1
φ 2 φ 2C φ 2
˞
The characteristics were measured using DM-412X.
˞
Winding resistance 60 Ω is typical value.
˞

Substitutable as two bipolars due to open common terminal pins.
˞

Substitutable as a bipolar by combination of
φ 1-φ  and φ 2-φ 2 or combination of φ 1-φ 1C and φ 2-φ 2C.
Lot production is required. Please consult us for ordering.