English
Language : 

SA-5000 Datasheet, PDF (2/8 Pages) Copal Electronics – ROTARY CODED SWITCHES
SA-5000
ROTARY CODED SWITCHES
˙ PART NUMBER DESIGNATION
S A - 5 0 1 0 A 1EW
Series name
Shape of rotor
0É¿Without knob
1É¿With knob (extended shaft)
Form of packaging
WÉ¿Tray packaging
BlankɿPlastic bag
Terminal pin
EÉ¿Sn-Cu (Lead-flee)
Code format
1É¿10 positions, real code
3É¿10 positions, complementary code
5É¿16 positions, real code
7É¿16 positions, complementary code
Setting position
0É¿Top setting
1É¿Side setting
Resistance value
1ɿ10 kЊ
3ɿ3.3 kЊ
Built-in circuit
AÉ¿Resistors (Housing color Yellow)
BÉ¿Resistor and diodes(Housing color Red)
CÉ¿Diodes(Housing color Black)
DÉ¿Diodes(Housing color Black)
(Polarity is for reverse with C)
˙ STANDARD SPECIFICATIONS
Circuit type
BCD (Real code, complementary code)
BCH (Real code, complementary code)
Operating temperature range
Storage temperature range
− 25 ~ 75 °C
Sealing
Net weight
Washable by “O” ring
˞Please refer to 150,151
Approx. 1.5 g (Top setting)
Approx. 2.0 g (Side setting)
Approx. 1.6 g (Top setting with knob)
Approx. 2.0 g (Side setting with knob)
˙ MECHANICAL CHARACTERISTICS
No. of positions
Adjustment torque
Stepping angle
Terminal strength
Solderability
Soldering heat
16, 10
10 ~ 35 mN·m
{102 ~ 357 gf·cm}
22.5° (16 positions)
36° (10 positions)
10 N {1.02 kgf} minimum
245 ± 3 °C, 2 ~ 3 s
Flow : 260 ± 3 °C, 5 ~ 6 s,
two times maximum
Manual soldering : 380 ± 10 °C, 3 ~ 4 s
{ } : Reference only
˙ ELECTRICAL CHARACTERISTICS
Contact rating
Non-switching
Switching
Contact resistance
Insulation resistance
Dielectric strength
DC50 V 100 mA
DC5 V 100 mA
1 Њ maximum
1000 MЊ (DC100 V) minimum
AC250 V, 60 s
˙ ENVIRONMENTAL CHARACTERISTICS
Vibration
Shock
Load life
Humidity (Steady state)
(Amplitude) 1.5 mm or
(Acceleration) 98 m/s2,
10-500-10 Hz, 3 directions for 2 h each
490 m/s2, 11 ms
6 directions for 3 times each
10000 steps minimum
DC5 V, 100 mA
40 °C, Relative humidity 90 ~ 95 %, 240 h
High temperature exposure
75 °C, 16 h
Low temperature exposure
− 25 °C, 16 h
Thermal shock
− 25 (0.5 h) ~ 75 °C (0.5 h), 5 cycles