PRCP-USMF Datasheet, PDF (1/5 Pages) Copal Electronics – Polymer Resettable Circuit Protectors

*RoHS ^COMPLIANT
Features
Compliant with AEC-Q200 Rev-C- Stress
Test Qualification for Passive Components
in Automotive Applications
Fast tripping resettable circuit protection
Surface mount packaging for automated
assembly
Small footprint size (1210)
RoHS compliant* and halogen free**
Agency recognition*


PRCP-USMF Series - Polymer Resettable Circuit Protectors
Electrical Characteristics
Model
V max.
Volts
PRCP-USMF005
30
PRCP-USMF010
30
PRCP-USMF020
30
PRCP-USMF035
6
PRCP-USMF050
13.2
PRCP-USMF075
6
PRCP-USMF110
6
PRCP-USMF150***
6
*** UL only
I max.
Amps
10
10
10
40
40
40
40
40
Ihold
Itrip
Amperes
at 23 ˆ
Hold
Trip
0.05
0.15
0.10
0.30
0.20
0.40
0.35
0.75
0.50
1.00
0.75
1.50
1.10
2.20
1.50
3.00
Resistance
Ohms
at 23 ˆ
RMin. R1Max.
2.800
0.800
50.000
15.000
0.400
5.000
0.200
1.300
0.180
0.900
0.070
0.050
0.450
0.210
0.030
0.110
Max. Time
To Trip
Amperes Seconds
at 23 ˆ at 23 ˆ
0.25
1.50
0.50
0.60
8.00
0.02
8.00
0.20
8.00
0.10
8.00
0.10
5.00
1.00
5.00
5.00
Tripped
Power
Dissipation
Watts
at 23 ˆ
Typ.
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
Environmental Characteristics
Operating Temperature............................. -40
ˆ
UP

ˆ
Maximum Device Surface Temperature
in Tripped State........................................125 ˆ
Passive Aging............................................+85 ˆ,1000 hours.............................................................±5 % typical resistance change
Humidity Aging...........................................+85 ˆ,85 % R.H. 1000 hours............................................±5 % typical resistance change
Thermal Shock...........................................+85 ˆ
UP

ˆ 
UJNFT...................................................±10 % typical resistance change
Solvent Resistance....................................MIL-STD-202, Method215..................................................No change
Vibration....................................................MIL-STD-883C,Method 2007.1,.........................................No change
Condition A
Test Procedures And Requirements For Model PRCP-USMF Series
Test
Test Conditions
Accept/Reject Criteria
Visual/Mech........................................Verify dimensions and materials...................................Per PRCP physical description
Resistance..........................................In still air @ 23 ˆ .........................................................Rmin≤R≤R1max
Time to Trip ........................................At specified current,Vmax,23
ˆ....................................T≤max.time to trip (seconds)
Hold Current.......................................30 min at Ihold...............................................................No trip
Trip Cycle Life.....................................Vmax,Imax,100 cycles..................................................No arcing or burning
Trip Endurance....................................Vmax,48 hours .............................................................No arcing or burning
Solderability ........................................ANSI/J-STD-002 ...........................................................95% min. coverage
UL File Number...................................E300792
CSA File Number................................CA1730526
TÜV Certificate Number.....................R 50075506
* RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011.
** To be considered halogen free, (a) the Bromine (Br) content is 900 ppm or less;
(b) the Chlorine (Cl) content is 900 ppm or less; and (c) the total Bromine (Br) and Chlorine (Cl) content is 1500 ppm or less.ɹSpecifi cations are subject to change without notice.
The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.
Customers should verify actual device performance in their specific applications.