PRCP-RM Datasheet, PDF (1/6 Pages) Copal Electronics – Polymer Resettable Circuit Protectors

*RoHS ^COMPLIANT
C
RM055
0220S
Features
■ Radial leaded devices
■ Cured, flame retardant epoxy polymer
insulating material meets UL94 V-0
requirements
■ Bulk packaging, tape and reel available
■ Resettable circuit protection
■ Agency recognition:
■ RoHS compliant* and halogen free**
Applications
■ _{Food blenders, coeffe machines}
■ HVAC
■ Electric fans, blowers
■ AC adaptors
PRCP-RM Series - Polymer Resettable Circuit Protectors
Electrical Characteristics
Typical Current
Trip Limit
Model
Ihold
Itrip
at 23 ºC at 23 ºC
(A)
(A)
PRCP-RM005/240
PRCP-RM008/240
PRCP-RM012/240
PRCP-RM016/240
PRCP-RM025/240
PRCP-RM033/240
PRCP-RM040/240
PRCP-RM055/240
0.05
0.08
0.12
0.16
0.25
0.33
0.40
0.55
0.12
0.19
0.30
0.37
0.56
0.74
0.90
1.25
Vmax
Operating
Voltage
(Vac)
240
240
240
240
240
240
240
240
Interrupt
Voltage
(Vac)
265
265
265
265
265
265
265
265
Imax
Interrupt
Current
(A)
1.0
1.2
1.2
2.0
3.5
4.5
5.5
7.0
Initial
Resistance
R _min
at 23 ºC
(Ohms)
18.50
7.40
3.00
2.50
1.30
0.77
0.60
0.45
One Hour
Post-Trip
Resistance
R1 max
at 23 ºC
(Ohms)
65.00
26.00
12.00
7.80
3.80
2.60
1.90
1.45
Maximum
Time to Trip
at 23 ºC
(A)
0.25
0.40
0.60
0.80
1.25
1.65
2.00
2.75
(Sec.)
10.0
10.0
15.0
15.0
18.5
21.0
24.0
26.0
Tripped
Power
Dissipation
PD Typ.
at 23 ºC
(W)
0.9
0.9
1.0
1.4
1.5
1.7
2.0
3.4
Environmental Characteristics
Operating Temperature................................. -20 ºC to +85 ºC
Humidity Aging. ............................................. +85 ºC, 85 % R.H. 1000 h................................... ±20 % typical resistance change
Passive Aging ............................................... +85 ºC, 1000 h .................................................... ±20 % typical resistance change
Vibration. ....................................................... MIL-STD-883C, Method 2007.1.......................... No change
Condition A
Solvent Resistance ....................................... MIL-STD-202, Method 215.................................. No change
Test Procedures And Requirements For Model PRCP-RM Series
Item
Test Conditions
Accept/Reject Criteria
Visual/Mechanical ......................................... Verify dimensions and material ...........................Per PRCP physical description
Resistance .................................................... In still air @ 23 ºC................................................Rmin ≤ R ≤ R1 max
Time to Trip................................................... 240 Vac, specified current ..................................T ≤ maximum time to trip
Hold Current ................................................. At Ihold ................................................................No trip
Trip Cycle Life ............................................... 240 Vac, Imax, 100 cycles ..................................No arcing or burning
Trip Endurance ............................................. a) 240 Vac, Imax, 24 h ................................No arcing or burning
b) 265 Vac, Imax, 30 min
Solderability .................................................. MIL-STD-202, Method 208..................................95 % minimum coverage
UL File Number..................................... E300792
TÜV Certificate Number........................ R50276278
*RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011.
**COPAL follows the prevailing definition of “halogen free” in the industry.COPAL considers a product to be “halogen free” if (a) the Bromine (Br) content is 900 ppm or less;
(b) the Cholrine(Cl) content is 900 ppm or less; and (c) the total Bromine (Br) and Chlorine (Cl) content is 1500 ppm or less.
Specifications are subject to change without notice.
The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.
Customers should verify actual device performance in their specific applications.