PRCP-PSMF Datasheet, PDF (1/5 Pages) Copal Electronics – Polymer Resettable Circuit Protectors

*RoHS ^COMPLIANT
Features
Compact design to save board space -
0805 footprint
Small size results in very fast time to
react to fault events
Low profile
RoHS compliant* and halogen free**
Agency recognition:
Applications
USB port protection - USB 2.0, 3.0 & OTG
HDMI 1.4 Source protection
PC motherboards - Plug and Play
protection
Mobile phones - Battery and port
protection
PDAs / digital cameras
Game console port protection
PRCP-PSMF Series - Polymer Resettable Circuit Protectors
Electrical Characteristics
Model
V max.
Volts
PRCP-PSMF010X
15
PRCP-PSMF020X
9
PRCP-PSMF035X
6
PRCP-PSMF050X
6
PRCP-PSMF075X
6
PRCP-PSMF110X
6
I max.
Amps
40
40
40
40
40
40
Ihold
Itrip
Amperes
at 23 C
Hold
Trip
0.10
0.30
0.20
0.50
0.35
0.75
0.50
1.00
0.75
1.50
1.10
2.20
Resistance
Ohms
at 23 C
RMin.
R1Max.
1.0
7.5
0.65
3.5
0.250
1.200
0.150
0.900
0.090
0.350
0.060
0.210
Max. Time
To Trip
Tripped
Power
Dissipation
Amperes
at 23 C
0.5
8.00
8.00
8.00
8.00
8.00
Seconds
at 23 C
1.5
0.02
0.10
0.10
0.20
0.30
Watts
at 23 C
Typ.
0.5
0.5
0.5
0.5
0.6
0.6
Environmental Characteristics
Operating Temperature ......................................-40 °C to +85 °C
Maximum Device Surface Temperature
in Tripped State ................................................125 °C
Passive Aging......................................................+85 °C, 1000 hours ...................................± 5 % typical resistance change
Humidity Aging....................................................+85 °C, 85 % R.H. 1000 hours ..................± 5 % typical resistance change
Thermal Shock ....................................................+85 °C to -40 °C, 20 times ........................±10 % typical resistan ce change
Solvent Resistance ............................................MIL-STD-202, Method 215 ........................No change
Vibration ..............................................................MIL-STD-883C, Method 2007.1, ................No change
Condition A
Test Procedures And Requirements For Model PRCP-PSMF Series
Test
Test Conditions
Accept/Reject Criteria
Visual/Mech.....................................Verify dimensions and materials ....................................Per PRCP physical description
Resistance ......................................In still air @ 23 °C...........................................................Rmin R R1max
Time to Trip ....................................At specified current, Vmax, 23 °C .................................. T max. time to trip (seconds)
Hold Current ..................................30 min. at Ihold .............................. ................................No trip
Trip Cycle Life ................................Vmax, Imax, 100 cycles ..................................................No arcing or burning
Trip Endurance ................................Vmax, 48 hours ..............................................................No arcing or burning
Solderability ....................................ANSI/J-STD-002 ............................................................95 % min. coverage
UL File Number ................................E..300792
Thermal Derating Chart - Ihold / Itrip (Amps)
Model
PRCP-PSMF010X
PRCP-PSMF020X
PRCP-PSMF035X
PRCP-PSMF050X
PRCP-PSMF075X
PRCP-PSMF110X
-40 C
0.15 / 0.45
0.28 / 0.70
0.47 / 1.01
0.68 / 1.36
1.00 / 2.00
1.45 / 2.90
-20 C
0.13 / 0.39
0.25 / 0.63
0.44 / 0.94
0.62 / 1.24
0.90 / 1.80
1.35 / 2.70
0C
0.12 / 0.36
0.23 / 0.58
0.39 / 0.84
0.55 / 1.10
0.79 / 1.58
1.20 / 2.40
Ambient Operating Temperature
23 C
40 C
50 C
0.10 / 0.30 0.09 / 0.27 0.08 / 0.24
0.20 / 0.50 0.17 / 0.43 0.14 / 0.35
0.35 / 0.75 0.30 / 0.64 0.27 / 0.58
0.50 / 1.00 0.40 / 0.80 0.37 / 0.74
0.75 / 1.50 0.63 / 1.26 0.57 / 1.14
1.10 / 2.20 0.92 / 1.84 0.84 / 1.68
60 C
0.07 / 0.21
0.12 / 0.30
0.24 / 0.51
0.33 / 0.66
0.53 / 1.06
0.75 / 1.50
70 C
0.06/0.18
0.10/0.25
0.20/0.43
0.29/0.58
0.42/0.84
0.65/1.30
85 C
0.05 / 0.15
0.07 / 0.18
0.14 / 0.30
0.23 / 0.46
0.35 / 0.70
0.52 / 1.04
*RoHS Directive 2002/95/EC Jan27 2003 including Annex
**To be considered halogen free,each homogenous material can have a maximum concentration of 900 ppm of either bromine or chlorine.
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications.