JP-30 Datasheet, PDF (1/2 Pages) Copal Electronics – CERMET SINGLE TURN TYPE

JP-30 CERMET SINGLE TURN TYPE
RoHS compliant
Basic construction
˙ FEATURES
O $PTU
FGGFDUJWF
*O
IPVTF
DPNQBSJTPO
O )JHI
SFTPMVJJPO
&TTFOUJBMMZ
JOGJOJUF
O 3P)4
DPNQMJBOU
˙ PART NUMBER DESIGNATION
Series name
JP-30É¿
For sensor
JP-30-1k
Nominal resistance valueʢїʣ
500, 1 k, 2 k, 5 k, 10 k, 20 k, 50 k, 100 k
Cermet single turn type
˙ STANDARD SPECIFICATIONS
Item
Part number
JP-30
Resistance torelance
%
ʶ2
Resolution
Essentially infinite
Independent linearity
%
ʶ 0.5
Effective electrical angle
300° ʶ 1°
Mechanical angle
360° continuous
Power rating (at 40 °C) W
1.5
Dielectric strength
Vrms
Insulation resistance
Mї
minimum
Rotational torque mN·m {gf·cm}
1000 1 min
1000 (at DC500 V)
2.94 {30} maximum
Peak noise
2 % or 100 ї, whichever is greater
Temp. coefficient ofresistance 10^-6/°C
ʶ 150
Operating temp. range °C
− 55 ~ 85
Maximum rotational speed r/min
150
Rotational life
3 million revolution
Net weight
g
Approx. 26
Strength of tighten screw
0.98 N·m {10 kgf·cm} maximum
K Perform soldering of the terminals at 380 °C for no more three seconds, and avoid
applying excess heat. Also, avoid applying outside force to the terminals.
In case of using multiturn potentiometers, when rotating the shaft to the
mechanical limit, apply torque below the strength of the stopper. Also, give due
consideration to thrust and radial loading.