English
Language : 

DP7115 Datasheet, PDF (1/12 Pages) Copal Electronics – 32-Tap Digital Potentiometer
DP7115
32-Tap Digital Potentiometer (DP)
Description
The DP7115 is a single digital potentiometer (DP)
designed as an electronic replacement for mechanical
potentiometers and trim pots. Ideal for automated adjustments on high
volume production lines, they are also well suited for applications
where equipment requiring periodic adjustment is either difficult to
access or located in a hazardous or remote environment.
The DP7115 contains a ïWDS series resistor array connected
between two terminals RH and RL. An up/down counter and decoder
that are controlled by three input pins, determines which tap is
connected to the wiper, RW. The wiper is always set to the mid point,
tap 15 at power up. The tap position is not stored in memory.
Wiperïcontrol of the DP7115 is accomplished with three input
control pins, CS, U/D, and INC. The INC input increments the wiper
in the direction which is determined by the logic state of the U/D input.
The CS input is used to select the device.
The digital potentiometer can be used as a WKUHHïterminal
resistive divider or as a WZRïWHUPLQDO variable resistor.
DPs bring variability and programmability to a wide variety of
applications including control, parameter adjustments, and signal
processing.
For a pinïcompatible device that recalls a stored tap position on
powerïup refer to the DP7114 data sheet.
Features
v 32ïposition Linear Taper Potentiometer
v Low Power CMOS Technology
v Single Supply Operation: 2.5 V ï 6.0 V
v Increment Up/Down Serial Interface
v Resistance Values: 10 k , 50 k and 100 k
v Available in SOIC, TSSOP and MSOP and Packages
v These Devices are PbïFree, Halogen Free/BFR Free and are RoHS
Compliant
Applications
v Automated Product Calibration
v Remote Control Adjustments
v Offset, Gain and Zero Control
v Tamperïproof Calibrations
v Contrast, Brightness and Volume Controls
v Motor Controls and Feedback Systems
v Programmable Analog Functions
SOICï8
MSOPï8
TSSOPï8
PIN CONFIGURATIONS
1
INC
VCC
U/D
CS
RH
RL
GND
RW
SOIC (V),
MSOP (Z)
1
CS
VCC
INC
U/D
RL
RW
GND
RH
TSSOP (Y)
(Top Views)
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 12 of this data sheet.
¢ NIDEC COPAL ELECTRONICS CORP.
1
October, 2010 ï Rev. 9
Publication Order Number:
DP7115/D