TCFH30N Datasheet, PDF (2/2 Pages) Cooper Bussmann, Inc. – Fuse Holders for Low-Peak CUBEFuse

TCFH Dimensions – in (mm)
A
A
B
D
B
C
C
D
TCFH30N & TCFH60N
E
Holder A
TCFH30N ^2.30
(58.50)
TCFH60N ^2.60
(66.12)
TCFH100N ^2.91
(73.81)
B
0.76
(19.37)
1.03
(26.23)
1.05
(26.74)
C
1.357
(34.24)
1.60
(40.64)
2.01
(50.93)
D
0.15
(3.76)
0.17
(4.34)
0.15
(3.81)
E
-
-
-
-
0.80
(20.39)
F
-
-
-
-
2.51
(63.65)
F
A
TCFH100N
CUBEFuse Availability and Applications
The indicating Low-Peak time-delay CUBEFuse (TCF_) and non-indicating
Low-Peak time-delay CUBEfuse (TCF_RN) are available in amp ratings from
1-100A. See Data Sheet 9000. The non-indicating, fast-acting Low-Peak
CUBEFuse is available in amp ratings from 1-100A. See data sheet 2147.
The CUBEFuse is also used in these other Cooper Bussmann
circuit protection solutions.
TCF_100RN FCF_100RN
CCP_CF
1-, 2- & 3-Pole switched disconnects
Data Sheet 1157
CCPB
1-, 2- & 3-Pole disconnects for the Quik-Spec™
Coordination Panelboard. Data Sheet 1160
CF_ Quik-Spec™ Safety
Switch disconnect (optional
window). Data Sheet 1156
The only controlled copy of this Data Sheet is the electronic read-only version located on the Cooper Bussmann Network Drive. All other copies of this document are by definition uncontrolled. This
bulletin is intended to clearly present comprehensive product data and provide technical information that will help the end user with design applications. Cooper Bussmann reserves the right, with-
out notice, to change design or construction of any products and to discontinue or limit distribution of any products. Cooper Bussmann also reserves the right to change or update, without notice,
any technical information contained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications.
© 2011 Cooper Bussmann
www.cooperbussmann.com
0711 BU-SB10812
Page 2 of 2
Data Sheet 9007