S-1 Datasheet, PDF (2/2 Pages) Cooper Bussmann, Inc. – Rejection base plug fuses – dual-element

Technical Data 1032
Effective May 2016
Rejection base plug fuses
dual-element, time-delay 125 volt, up to 30 amp
Features:
• Heavy duty, dual-element, time-delay rejection base fuse
• Use to protect critical motor circuits or motors that cycle on/
off frequently
• Features non-interchangeable body
• An industrial/commerical grade product with dual-element
construction
• These fuses thread into SA adaptors
• Industrial strength, featuring exclusive dual-element
construction
• This spring loaded design provides superior short circuit and
overload protection
• More time-delay than the medium duty Type SL fuses in order
to better protect industrial motors and critical residential
circuits
Time-current curve – average
melt
100
10
Amp
rating
1
0.1
0.01
Current in amps
The only controlled copy of this Data Sheet is the electronic read-only version located on the Eaton Network Drive. All other copies of this
document are by definition uncontrolled. This bulletin is intended to clearly present comprehensive product data and provide technical
information that will help the end user with design applications. Eaton reserves the right, without notice, to change design or construction
of any products and to discontinue or limit distribution of any products. Eaton also reserves the right to change or update, without notice,
any technical information contained in this bulletin. Once a product has been selected, it should be tested by the user in all possible
applications.
Eaton
1000 Eaton Boulevard
Cleveland, OH 44122
United States
Eaton.com
Bussmann Division
114 Old State Road
Ellisville, MO 63021
United States
Eaton.com/bussmannseries
© 2016 Eaton
All Rights Reserved
Printed in USA
Publication No. 1032 – SB02374
May 2016
Eaton and Bussmann are valuable
trademarks of Eaton in the US and other
countries. You are not permitted to use the
Eaton trademarks without prior written
consent of Eaton.
CSA is a registered trademark of the
Canadian Standards Group.
UL is a registered trademark of the
Underwriters Laboratories, Inc.
For Eaton’s Bussmann series
product information,
call 1-855-287-7626 or visit:
Eaton.com/bussmannseries
Follow us on social media to get the
latest product and support information.