CC12H4A-TR Datasheet, PDF (2/9 Pages) Cooper Bussmann, Inc. – Flat panel displays and televisions

Technical Data 4309
Effective July 2014
CC12H Series
High I²t Chip™ fuses
Electrical characteristics
Amp Rating
750mA-20A
1-3A
1-5A
1-5A
750mA, 6-20A
750mA-20A
% of Amp Rating
100%
200%
250%
300%
350%
1000%
Specifications
Opening Time
4 Hours, min
1-60 Seconds
5 Seconds, max
0.1-3 Seconds
5 Seconds, max
0.2-20mS
Environmental data
• Thermal Shock: MIL-STD-202, Method 107, Test Condition B
• Vibration: MIL-STD-202, Method 204, Test Condition C
• Moisture Resistance: MIL-STD-202, Method 106, 50 day cycle
• Solderability: ANSI/J-STD-002, Test B
• Normal ambient temperature: 23°C
• Operating temperature range -40°C to +125°C
Soldering method
• Wave Solder Immersion: 260°C, 10 seconds maximum.
• Solder Reflow: 260°C, 30 seconds maximum.
Catalog
Symbol
CC12H750mA
CC12H1A
CC12H1.5A
CC12H2A
CC12H2.5A
CC12H3A
CC12H3.5A
CC12H4A
CC12H4.5A
CC12H5A
CC12H6A
CC12H7A
CC12H8A
CC12H10A
CC12H12A
CC12H15A
CC12H20A
Current Rating
(amps)
0.75
1
1.5
2
2.5
3
3.5
4
4.5
5
6
7
8
10
12
15
20
Voltage Rating
(Vdc)
63
63
63
63
63
63
63
63
32
32
32
32
32
32
32
32
32
Interrupting
Rating* (amps)
50
50
50
50
50
50
50
50
100
100
100
100
100
100
100
100
100
Resistance
(Ω)** Typical
0.780
0.470
0.218
0.133
0.079
0.049
0.037
0.033
0.028
0.023
0.0155
0.011
0.007
0.0065
0.0045
0.0030
0.0020
Typical Melt
(I²t)† DC
0.15
0.18
0.4
1.1
1.7
2.2
2.7
3.2
4.2
6.0
8.0
9.0
12.0
33
45
40
50
Typical Voltage
Drop (mV)‡
840
490
355
305
240
185
180
169
160
140
140
120
80
90
80
70
60
Alpha
Marking
E
H
K
N
O
P
R
S
X
T
F
J
M
U
W
Y
Q
* DC Interrupting Rating (Measured at rated voltage, time constant of less than 50 microseconds, battery source)
** DC Cold Resistance (Measured at 10% of rated current)
† Typical Melting I²t (Measured with a battery bank at rated DC voltage, 10x-rated current, not to exceed interrupting rating, time constant of calibrated circuit less than 50
microseconds)
‡ Typical Voltage Drop (Measured at rated current after temperature stabilizes)
Device designed to carry rated current for four hours minimum. An operating current of 80% or less of rated current is recommended, with further derating required at
elevated ambient temperatures.
Dimensions - mm (in)
Pad layout
Drawing not to scale.
0.51 +/- 0.25 typ.
(0.02 +/- 0.01)
0.51 +/- 0.25 typ.
(0.02 +/- 0.01)
1.52 (0.06)
1.6 +/- 0.2 typ.
(0.063 +/- 0.008)
Top View
2.03 (0.08)
0.6 + 0.2, -0.15
(0.024 +0.008, -0.006)
Side View
3.2 +/- 0.2
(0.126 + /- 0.008)
2
www.eaton.com/elx
End View
1.6 +/- 0.2
(0.063 +/- 0.008)
1.52 (0.06)