105U-G-DE1-150-5W Datasheet, PDF (2/4 Pages) Cooper Bussmann, Inc. – 105U-G Wireless Gateway

Technical Data TD032007EN
Effective January 2014
Specifications
SPECIFICATION DESCRIPTION
Transmitter and Receiver
Frequency ^a
148–174 MHz
200–235 MHz
360–512 MHz
869.525 MHz
869.875 MHz
Transmit power ^a 148–174 MHz, 0.1–5W
220–235 MHz, 0.1–5W
360–512 MHz, 10 mW–5W
869.525 MHz, 500 mW
869.875 MHz, 5 mW
Transmission
Frequency modulation (FM)
Modulation
Digital frequency shift key (DFSK)
Receiver sensitivity 148–512 MHz: –114 dBm
869.525 MHz, 869.875 MHz: –106 dBm
Channel spacing 148–512 MHz: 12.5 kHz
869.525 MHz, 869.875 MHz: 250 kHz
Data rate
400 MHz: 3.6 kbps
869.525 MHz, 869.875 MHz: 19.2 kbps, forward-error correction
Range (LoS) ^b
150/220/400 MHz: 10 mW EIRP to 1.2 miles (2 km), 500 mW
EIRP to 6.2 miles (10 km), 5W EIRP to 34 miles (55 km)
869.525 MHz: 3.1 miles (5 km) 500 mW
869.875 MHz: 0.6 miles (1 km) 5 mW
Antenna connector 148–512 MHz: BNC female coaxial
869.525, 869.875 MHz: SMA female coaxial
internal gas discharger arrestor protection
Input/Output
Discrete I/O ^c
8 input voltage-free/NPN, wetting current 0.5 mA; 8 output FET
30 Vdc/500 mA
Ethernet Port
Ethernet port
10/100Base-T; RJ45 connector (IEEE 802.3)
Link activity
Link, 100Base-T via LED
Serial settings
7/8 data bits; no parity, 1 stop bit
Serial Port
RS-232
9-pin DB9 female connector
RS-485
2-pin terminal block, non-isolated to 4000' (1200 m)
Data rate (bps)
300, 600, 1200, 2400, 4800, 9600, 14400, 19200, 38400
Serial settings
7/8 data bits; stop/start/parity (configurable)
Protocols and Configuration
System address Configurable system address
Protocols supported:
105U-G-MD1
Modbus RTU (master/slave), DF1 up to 4300 I/O points: analog
and/or discrete
Modbus, RS-232/RS-485, 300–38400 bps
DF1 (full duplex), RS-232, 300–38400 bps
105U-G-ET1
EtherNet/IP (Level 2 I/O server)
Modbus/TCP (Class 0, 1, partially Class 2 slave)
TCP/IP functions; embedded web system (dynamic HTTP);
onboard file system for downloadable web pages via FTP server;
email (SMTP) 2048 bytes input/2048 bytes output; up to 4300
DIO or 1024 AI/1024 AO; 10/100 Mbps, RJ-45 connector
105U-G-PR1
Profibus DP slave to EN 50170 standard; 416 I/O bytes (up to
1952 DI/1952 DO or 122 AI/122 AO)
RS-485 optically isolated with onboard DC/DC converter, auto-
matic baud rate detection: 9600 bps–12 Mbps
105U-G-PR2
Profibus DP master to EN 50170 standard; 2048 bytes input/
2048 bytes output (up to 4300 DIO or 1024 AI/1024 AO)
RS-485 optically isolated with onboard DC/DC converter,
automatic baud rate detection: 9600 bps–12 Mbps
105U-G Wireless Gateway


SPECIFICATION DESCRIPTION
105U-G-DE1
DeviceNet slave
512 bytes input/512 bytes output (up to 4300 DIO
or 256 AI/256 AO)
16-bit register size; up to 500 remote addresses
RS-422 optically isolated (selectable 125/250/500 kbps baud
rate)
105U-G-M+1
Modbus plus slave
Global database transactions: routing up to six networks
2048 bytes input/2048 bytes output; up to 4300 DIO or
1024 AI/1024 AO
RS-485 optically isolated; standard baud rate of 1 Mbps
User configuration E-Series configuration utility
Configurable
parameters
Individual I/O mappings, update time, databus mappings,
protocol settings
Security
64-bit encryption on radio and serial
LED Indicators and Diagnostics
LED indication
Active, OK, serial TX and RX, radio TX and RX, I/O LED status
Refer to product manual for more information.
Reported
diagnostics
RSSI, communications logging, I/O status, battery voltage
Power Supply
Nominal supply
12–24 Vac/15–30 Vdc: over-voltage/reverse power protected
Average current
draw
105U-G-MD1: 150 mA @ 12V; 90 mA @ 24V; add 5 mA per I/O
105U-G-ET1/PR1/PR2/DE1/M+1: 270 mA @ 12V; 170 mA @ 24V;
add 5 mA per I/O
Transmit current
draw
450 mA @ 13.8 Vdc (0.5W)
600 mA @ 13.8 Vdc (1W)
800 mA @ 13.8 Vdc (2W)
1.25A @ 13.8 Vdc (5W)
Battery supply
11.5–15.0 Vdc (battery supply volts, internal I/O value)
Battery charging
circuit
Suitable for 12 Vdc sealed lead acid batteries, max. charge
current 2.0A (5W), 0.9A (500 mW)
Compliance
EMC
CE, FCC Part 15, AS3548, EN 301 489
RF (radio)
EN 300 220, EN 300 113, FCC Part 90, RSS-119, AS4295,
AS4768.1
Hazardous area
UL Class I, Division 2
Safety
EN 60950
General
Size
5.1" x 7.3" x 2.4" (130 mm x 185 mm x 60 mm)
Housing
Extruded aluminum
Mounting
DIN rail
Terminal blocks
Removable; max conductor 14 AWG (2.5 mm²)
Temperature rating 105U-G-MD1, 150/220/400 MHz: –22 to +140°F (–30 to +60°C)
105U-G-MD1, 869 MHz: –40 to +140°F (–40 to +60°C)
105U-G-ET1/PR1/PR2/DE1/M+1: –32 to +140°F (0 to +60°C)
Humidity rating
105U-G-MD1: RH noncondensing 0–99%
105U-G-ET1/PR1/PR2/DE1/M+1: RH noncondensing 0–95%
Weight
1 kg (2.2 lbs)
NNote: Specifications are subject to change.
a Specify RF power and frequency at time of order.
b Typical maximum LoS sight range (single hop, repeaters will extend)
c Configurable as inputs/outputs
2
eaton www.eaton.com