TVSA02V05C004 Datasheet, PDF (1/2 Pages) Cooper Bussmann, Inc. – Transient Voltage ESD Suppressor

Transient Voltage ESD Suppressor
TVSA Series
Surface Mount Device
Description
Cooper Bussmann^® TVSA Series of transient voltage suppressors are
designed to protect electronic circuits from ESD damage. With its small,
standardized 0201 and 0402 sizes, it’s easy to implement them into any
circuit board design.
Features
• Silicon based chip
• Low capacitance to meet the needs for high speed single transient
voltage protection
• Provides ESD protection with fast response time (<1ns) allowing
equipment to pass IEC 61000-4-2 level 4 test
• Low profile designs for board space savings
• Low leakage current reduces power consumption
• Low clamping voltage
• Solid-state silicon-avalanche technology
• Lead free, halogen free and RoHS compliant for global applications
HALOGEN
HF
FREE
Pb
Applications
• Computers and peripherals
• Digital still cameras
• Cell phones
• PDAs
• DVD Players
• MP3/Multimedia players
• A-V Equipment
• External storage
• DSL Modems
• Set top boxes
• Docking systems
Part Numbering System: TVSA 04 V05
Product Family
Size
Reverse Stand-Off Voltage
Capacitance in pF
Packaging
• Size 0201: 15,000 pieces per reel - EIA (EIAJ)
• Size 0402: 10,000 pieces per reel - EIA (EIAJ)
C006
Part
Number
Size
TVSA02V05C004
0201
TVSA04V05C006
0402
Stand-Off
Voltage
5
5
Specifications
Breakdown
Voltage
10
10
Clamping Voltage
At Ipeak = 1A
17
17
Stand-off Voltage - Maximum DC operating voltage the varistor can maintain and not exceed 1μA leakage current.
Breakdown Voltage - Measured at any I/O pin to ground at 1mA DC current.
Clamping Voltage - Maximum peak voltage across the varistor with 8/20μs waveform and 1A pulse current.
Capacitance - Device capacitance measured with zero volt bias at 1MHz.
ESD Air/Contact - Voltages tested to IEC 61000-4-2.
Capacitance
pF
4
6
ESD
Air/Contact (kV)
15/8
15/8
Leakage Current
(typical)
< 10nA
< 10nA
0510 BU-SB10348
Page 1 of 2
Data Sheet 4072