T-2-1-4 Datasheet, PDF (1/1 Pages) Cooper Bussmann, Inc. – Dual-Element, Time-Delay, Edison Base 125 Volts, 1–30 Amps

Plug Fuses
Dual-Element, Time-Delay, Edison Base
125 Volts, 1–30 Amps
Bussmann^®
Type T
CATALOG SYMBOL: T
DUAL-ELEMENT, TIME-DELAY
1 TO 30A
125VAC OR LESS
U.L. LISTED
(GUIDE #JEFV, FILE # E12112)
Electrical Ratings (Catalog Symbol and Amperes)
125 Volts
125 Volts
125 Volts
T-3/10
T-2-1/4
T-7
T-4/10
T-2-1/2
T-8
T-1/2
T-2-8/10
T-9
T-6/10
T-3
T-10
T-8/10
T-3-2/10
T-12
T-1
T-3-1/2
T-14
T-1-1/8
T-4
T-15
T-1-1/4
T-4-1/2
T-20
T-1-4/10
T-5
T-25
T-1-6/10
T-5-6/10
T-30
T-1-8/10
T-6
—
T-2
T-6-1/4
—
• Heavy Duty Time-Delay Plug Fuse.
• Use to protect critical motor circuits or motors that cycle
on/off frequently.
• An industrial/commerical grade product with exclusive dual-
element construction.
• Edison base size.
• These fuses thread into fuse receptacles.
• The Heavy Duty T fuses are industrial strength products, fea-
turing Bussmann’s exclusive Dual-Element construction.
• This spring loaded design provides superior short circuit and
overload protection.
• The T fuses have more time-delay than the medium duty
fuses in order to better protect industrial motors and critical
residential circuits.
Time-Current Characteristics–Total Clear
100
AMPERE
RATING
10
1
Package Quantity and Weight
Ampere
Quantity
Weight
Ratings
Box
Card
Per Box Per 5 Cards
3/10–14A
4
1
0.210
0.46
15, 20, 25, & 30A
4
3
0.25
1.07
.1
.01
CURRENT IN AMPERES
The only controlled copy of this BIF document is the electronic read-only version located on the Bussmann Network Drive. All other copies of this BIF document are by definition uncontrolled. This bulletin is intended to
clearly present comprehensive product data and provide technical information that will help the end user with design applications. Bussmann reserves the right, without notice, to change design or construction of any
products and to discontinue or limit distribution of any products. Bussmann also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a product has been select-
ed, it should be tested by the user in all possible applications.
12-28-98
SB98107 Rev. A
Form No. Type T
Page 1 of 1
BIF Doc #1034