PC06F1A Datasheet, PDF (1/2 Pages) Cooper Bussmann, Inc. – PolyCHIP Fuses PC06F Series, Fast Acting

Description
• Low resistance
• Low profile 0603/1608 design
• Pb-free and RoHS Compliant
• High inrush withstand capability
• Polymer matrix design
• One time positive disconnect
• Ampere rating marked on both sides, dual orientation
• Compatible with leaded and lead-free reflow and wave
solder
ELECTRICAL CHARACTERISTICS
% of Amp Rating
Opening Time
100%
4 Hours Minimum
200%
5 Seconds Maximum
Agency Information
• UL Recognition Card: JDYX2, E19180
Environmental Data
• Life Test: MIL-STD-202, Method 108A, Test Condition C
• Load Humidity: MIL-STD-202, Method 103B
• Moisture Resistance: MIL-STD-202, Method 106G
• Thermal Shock: MIL-STD-202, Method 107D
• Solderability: ANSI/J-STD-002, Test B
• Mechanical Shock: MIL-STD-202, Method 213B,
Condition A
• High Frequency Vibration: MIL-STD-202, Method 204D,
Condition D
Packaging & Ordering Information
• 5,000 pieces; paper tape; 178mm (7 inch) reel;
per EIA Standard 481-1
• Order by Product Code (no prefix or suffix necessary)
PolyCHIP^™ Fuses
PC06F Series, Fast Acting
Dimensions
⁄mm
(inches)
Land Pattern
1.25
(0.05)
0.90
(0.035)
0.50
(0.02)
Soldering Method
• Wave Solder: 260°C, 10 sec max.
• Infrared: 260°C, 30 sec max.
Product
Code
PC06F500MA
PC06F750MA
PC06F1A
PC06F1.5A
PC06F2A
PC06F2.5A
PC06F3A
PC06F3.5A
PC06F4A
Voltage Rating
AC/DC
32V
32V
32V
32V
32V
32V
32V
32V
32V
SPECIFICATIONS
Interrupting
Typical DC Cold
Rating @
Resistance
Rated Voltage*
(ohms)**
50A
0.143
50A
0.088
50A
0.065
50A
0.042
50A
0.027
50A
0.021
50A
0.018
50A
0.014
50A
0.012
Typical Melting
I²t (A²s)***
0.00128
0.00291
0.00616
0.02565
0.03968
0.10139
0.15778
0.25844
0.27034
Alpha
Code
F
G
H
K
N
O
P
R
S
* DC Interrupting Rating is measured at designated voltage, time constant of less than 50 microseconds, battery source.
** DC cold resistance is measured at less than 10% of rated current.
*** Melting I²t is measured with a battery back at rated DC voltage, at the lesser of either 10 times rated current or the interrupting rating with a time constant of less than 50
microseconds.