LPJ-70SPI Datasheet, PDF (1/3 Pages) Cooper Bussmann, Inc. – Dual-Element, Time-Delay Fuses

Bussmann^®
LOW-PEAK^®
Dual-Element, Time-Delay Fuses
Class J – 600 Volt
LPJ_SPI
70 to 600A
Dimensional Data
4.63"
(– 0.03)
3.63"
2.63"
.75" 1.13" (– 0.03)
Catalog Symbol: LPJ-_SPI
Dual-Element, Time-Delay – 10 seconds (minimum) at 500%
rated current
Current-Limiting
Ampere Rating: 70 to 600A
Voltage Rating:
ac: 600V (or less)
dc: 300V (or less)
Interrupting Rating:
ac: 300,000A RMS Sym.
dc: 100,000A
Agency Information:
UL Listed – Special Purpose†, Guide JFHR, File E56412
CSA Certified, Class J per CSA C22.2 No. 248.8,
Class 1422-02, File 53787
†Meets all performance requirements of UL Standard 248-8 for Class J fuses.
Catalog Symbol and Ampere Ratings
LPJ-70SPI
LPJ-125SPI
LPJ-250SPI
LPJ-80SPI
LPJ-150SPI
LPJ-300SPI
LPJ-90SPI
LPJ-175SPI
LPJ-350SPI
LPJ-100SPI
LPJ-200SPI
LPJ-400SPI
LPJ-110SPI
LPJ-225SPI
LPJ-450SPI
LPJ-500SPI
LPJ-600SPI
—
—
—
Carton Quantity and Weight
Ampere
Ratings
70–100
110–200
225–400
450–600
*Weight per carton.
Carton
Qty.
5
5
1
1
Lbs.
1.69
4.21
1.67
2.80
Weight*
Kg.
0.767
1.910
0.758
1.270
Recommended fuseblocks for
Class J 600V fuses
See Data Sheet: 1114
For non-indicating version, the LPJ_SP
is available. See Data Sheet: 1007.
.43" ^1" .28"
.13"
70A to 100A
5.75"
(– 0.03)
4.38"
3.0"
110A to
200A
.43"
1.13"
.28"
1.38"
1.63" (– 0.03)
.19"
225A to 400A
450A to 600A
General Information:
• Permanent replacement fuse indication.
• True dual-element fuses with a minimum 10 second time-
delay at 500% overload.
• Long time-delay minimizes needless fuse openings due to
temporary overloads and transient surges.
• Can often be sized for back-up protection against motor
burnout from overload or single-phasing if other overload
protective devices fail.
• High interrupting rating to safely interrupt overcurrents up
to 300,000A.
• High degree of current-limitation due to the fast speed-of-
response to short-circuits.
• Faster response to damaging short-circuit currents than
mechanical overcurrent protective devices.
• Reduces let-through thermal and magnetic forces in order
to protect low withstand rated components.
• Proper sizing provides “no damage” Type “2” coordinated
protection for NEMA and IEC motor control in accordance
with IEC Standard 947-4-1.
• Dual-element fuses have lower resistance than ordinary
fuses, hence they run cooler.
• Lower watts loss reduces power consumption.
• Unique dimensions assure that another class of fuse with a
lesser voltage rating, interrupting rating or current-Iimiting
ability cannot be substituted.
• Space-saving package for equipment down sizing.
8-26-04
SB04295
CE logo denotes compliance with European Union Low Voltage Directive
(50-1000Vac, 75-1500Vdc). Refer to Data Sheet: 8002 or contact
Bussmann Application Engineering at 636-527-1270 for more information.
Form No. LPJ 70-600
Page 1 of 3
Data Sheet: 1063