LP-CC-5 Datasheet, PDF (1/2 Pages) Cooper Bussmann, Inc. – Time-Delay Fuses Class CC 600 Volt, Ú to 30 Amps

Bussmann^®
LOW-PEAK^®
Time-Delay Fuses
Class CC – 600 Volt, ⁄Ω™ to 30 Amps
LP-CC
Dimensional Data
1.5" (±0.031)
(38.1mm)
.41" (±0.005)
(10.3mm)
Catalog Symbol: LP-CC
Time-Delay, Current-Limiting
Ampere Rating: ⁄Ω™ to 30A
AC Voltage Rating: 600V (or less)
Interrupting Rating: 200,000A RMS Sym.
Agency Information:
UL Listed, Std. 248-4, Class CC, Guide JDDZ, File E4273
CSA Certified, C22.2 No. 248.4, Class 1422-02, File 53787
DC Voltage Rating: 300Vdc (or less)
⁄Ω™-2 °/⁄‚A and 20-30A, 20,000 AIR, UL 198L
150Vdc or less 3-15A, 20,000 AIR, UL 198L
Catalog Numbers
LP-CC-⁄Ω™
LP-CC-flꭧ
LP-CC-°Ω¡º
LP-CC-1
LP-CC-1⁄Ω•
LP-CC-1⁄Ω¢
LP-CC-1›Ω¡º
LP-CC-1⁄Ω™
LP-CC-1flꭧ
LP-CC-1°Ω¡º
LP-CC-2
LP-CC-2⁄Ω¢
LP-CC-2⁄Ω™
LP-CC-2°Ω¡º
LP-CC-3
LP-CC-3¤Ω¡º
LP-CC-3⁄Ω™
LP-CC-4
LP-CC-4⁄Ω™
LP-CC-5
LP-CC-5flꭧ
LP-CC-6
LP-CC-6⁄Ω¢
LP-CC-7
LP-CC-7⁄Ω™
LP-CC-8
LP-CC-9
LP-CC-10
LP-CC-12
LP-CC-15
LP-CC-20
LP-CC-25
LP-CC-30
—
—
Carton Quantity and Weight
Ampere
Ratings
0-30
*Weight per carton.
Carton
Qty.
10
Weight*
Lbs.
Kg.
.193
.088
Recommended fuseblocks/fuseholders for
Class CC 600V fuses
See Data Sheets listed below
• Open fuseblocks - 1105
• Finger-safe fuseholders - 1109, 1102, 1103, 1151
• Panel-mount fuseholders - 2114, 2113
• In-line fuseholders - 2126
General Information:
LP-CC LOW-PEAK Yellow™ Fuse
• A superior all-purpose, space-saving branch circuit fuse
that meets most protection requirements up to 30A.
• Very compact; physical size is only ⁄‹Ω£™∑ ≈ 1⁄Ω™∑ (10.3mm ≈
38.1mm) with rejection tip.
• The unique yellow color makes it easy to tell that the correct
fuse type is installed.
• Faster response to damaging short-circuit currents and
higher interrupting rating than mechanical overcurrent
protective devices.
200,000A Interrupting Rating
• Maximum interrupting rating for available fault current in
today's large capacity systems.
• Helps ensure that future growth will not obsolete the system.
Dual Characteristics
• Time-delay to avoid unwanted fuse openings from surge
currents.
• Fast speed of response under short-circuit conditions for a
high degree of current-limitation.
• ADVANTAGE: The LOW-PEAK^® fuse can be sized close
to full load ratings for maximum overload and short-circuit
protection.
• ADVANTAGE: Can be used where either a time-delay or
a fast-acting fuse is needed, making selection easier and
reducing spare fuse inventories for substantial cost reduction.
Superior Motor Protection
• For protection of small horsepower motor circuits.
• Proper sizing can provide Type “2” coordinated protection
for NEMA and IEC motor controllers.
• Motors receive maximum protection against burnout from
overloads and single phasing.
Current-Limiting Effects
Prospective Short- ^{*Let-Through Current (Apparent RMS Symmetrical)}
Circuit Current 1⁄Ω¢A
2°Ω¡ºA
15A
20A 25A
30A
1,000
100
135
240
305 380
435
3,000
140
210
350
440 575
580
5,000
165
255
420
570 690
710
10,000
210
340
540
700 870 1,000
20,000
260
435
680
870 1,090 1,305
30,000
290
525
800 1,030 1,300 1,520
40,000
315
610
870 1,150 1,390 1,700
50,000
340
650
915 1,215 1,520 1,820
60,000
350
735 1,050 1,300 1,650 1,980
80,000
390
785 1,130 1,500 1,780 2,180
100,000
420
830 1,210 1,600 2,000 2,400
200,000
525
1,100 1,600 2,000 2,520 3,050
*RMS Symmetrical Amperes Short-Circuit
NOTE: To calculate Ip (Ipeak) multiply IRMS value ≈ 2.3.
10-2-02
SB02295
CE logo denotes compliance with European Union Low Voltage Directive
(50-1000Vac, 75-1500Vdc). Refer to Data Sheet: 8002 or contact
Bussmann Application Engineering at 314-527-1270 for more information.
Form No. LP-CC
Page 1 of 2
Data Sheet: 1023