HET Datasheet, PDF (1/2 Pages) Cooper Bussmann, Inc. – TRON In-Line Fuseholders

TRON^® In-Line Fuseholders
Single-Pole for Solid Neutral
Bussmann^®
HET
Series
Non-Breakaway Holders
Catalog Symbol: HET-AA, HET-AB, HET-BB, HET-JJ, and
HET-JK
In-Line Fuseholders, Single-Pole
Water-Resistant
For breakaway holders, see page 2
HET — A HEB fuseholder with a permanently installed solid
neutral. Easily identified by white plastic coupling nut.
Example:
A single-pole, in-line holder for a neutral is required. One solid
copper #8 is on the load side, copper crimp for connection. A
solid copper #6 is on the line side, and a copper crimp is
required.
1. Choose HET- series.
2. Choose “A” for load side.
3. Choose “B” for line side.
Complete Catalog Number: HET-AB.
Ordering Information:
HET
Load
Terminal
Line
Terminal
Catalog and Specification Data - Non-Breakaway
Conductor Terminals
Conductors
Terminal Type
Size
Copper Crimp
Copper Set-Screw
#12 to #8
#12
#10
#6
#4
#12 to #3
#12 to #2
1
••
2
••
2
••
1
••
1
••
1
•
•
2
•
•
Catalog
Symbol
Load &
Line
(2 & 3)
A
B
J
K
Aluminum Set-Screw
#12 to #2
1
•
•
L
Catalog Data — Insulating Boots
Catalog
Numbers
2A0660
2A0661
Type
Single Conductor
Two Conductor
Insulating boots are not included with non-breakaway parts
and must be ordered separately. They come standard with
the breakaway series. The HET-AW & HET-JW do not have
the boots. These catalog items do not have a breakaway recep-
tacle.
When boots are utilized, extra heat retention requires that fuses
are sized at a minimum of 200% of the RMS load current.
Recommended Torque on Coupling Nut: 10-20 in-lb.
7-16-03
N03082
Form No. HET Series
Page 1 of 2
Data Sheet: 2125