GMT Datasheet, PDF (1/1 Pages) Cooper Bussmann, Inc. – Fuseholders for Indicating Fuses

™
Fuseholders for Indicating Fuses
GMT Type
CATALOG SYMBOL: HLS, HLT, PCT
FUSEHOLDERS FOR GMT TYPE INDICATING FUSES
ELECTRICAL RATING–60V DC, 125V AC
UL RECOGNIZED (GUIDE # IZLT2, FILE E14853)
15AMP (60V DC)
Materials:
Body:
Terminals:
Thermosplastic, UL 94V0 flammability rating
Tin-plated bifrucated copper
For use with GMT Type Indicating Fuses
Multiple Fuseholders with bus bars
Ordering Information–Catalog No.
Dimensional Data
Printed Circuit Board Application
Shown With GMT Fuse Installed
0.84"
(21.4mm)
0.31" Approx.
(7.7mm)
0.64"
(16.3mm)
1.02"
(25.9mm)
HLS
0.15"
(3.8mm)
0.15"
(3.8mm)
HLS-F
HLS-C
0.25"
(6.4mm)
0.41"
0.25" (10.3mm)
(6.4mm)
0.84"
(21.3mm)
0.64"
(16.3mm)
0.08"
(2.0mm)
0.45"
(11.4mm)
0.11"
(2.8mm)
PCT-A
PCT
0.19"
(4.8mm)
Panel Mounting Data
0.15"(3.8mm) Dia.
0.16"(3.9mm) Dia.
0.86"
(21.8mm)
1.21"
(30.8mm)
0.27"
(6.7mm)
Body Style
HLT
HLS (No flanges)
No. of Poles 01 thru 25
(Min. of 2 poles required for bus bars)
Type of bus bars used
B1*, B2, B3,
B4, B5, SL** (Short Leads .135")
ML** (Medium Leads .250")
** Not available with bus bars
Termination Location
L
(Left only)
Bus Bar Position
R
(Right only)
B
(Both ends)
P1†
(Inside–
Both Sides)
P2
(Outside–
Both Sides)
P3
(Outside–
Right Only)
P4
(Outside–
Left Only)
Note: Similar Body Dimensions
of All Holders Are Identical.
0.84"
(21.4mm)
HLT
0.64"
(16.3mm)
0.13"
(3.2mm)
1.02"
(25.9mm)
0.13"
(3.2mm)
HLT-F
Wire Wrap Terminal
0.025" x 0.063"
(0.64mm) (1.6mm)
HLT-D
Fuse Terminal
Alarm Terminal
.041"
(10.4mm)
(6⁰.4^.2m⁵m^") ^{x "A" Spaces}
Tolerance to be non-accumulative
0.25"
(6.4mm)
.09" Dia. Holes
(2.4mm) (3 Holes Per Poles of Fuseholder)
B1
(Angle Bar Only)*
B2
("L" Bar Only)
B3
("U" Bar Only)
* Angle Bar mounts on common or center terminals only.
†Minimum of 4 Poles Required.
**SL Version is not available with bus bars.
B4
(Angle & "L" Bars)
B5
("L" &"U" Bars)
The only controlled copy of this BIF document is the electronic read-only version located on the Bussmann Network Drive. All other copies of this BIF document are by definition uncontrolled.This bulletin is intended to
clearly present comprehensive product data and provide technical information that will help the end user with design applications. Bussmann reserves the right, without notice, to change design or construction of any
products and to discontinue or limit distribution of any products. Bussmann also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a product has been select-
ed, it should be tested by the user in all possible applications.
0712 BU-SB12567
Page 1 of 1
Data Sheet 5010