FP1007R1-R12-R Datasheet, PDF (1/4 Pages) Cooper Bussmann, Inc. – High Current, High Frequency, Power Inductors

High Current, High Frequency, Power Inductors
FLAT-PAC™ FP1007 Series
SMD Device
Description:
• Halogen free
• 125°C maximum total temperature operation
• 8.0 x 10.4 x 6.5, 7.0 or 7.5mm surface mount package
• Ferrite core material
• High current carrying capacity, low core losses
• Controlled DCR tolerance for sensing circuits
• Inductance range from 120nH to 300nH
• Current range from 32 to 94 Amps
• Frequency range up to 2MHz
• RoHS compliant
Applications:
• Multi-phase regulators
• Voltage Regulator Module (VRM)
• Desktop and server VRMs and EVRDs
• Notebook regulators
• Data networking and storage systems
• Graphics cards and battery power systems
• Point-of-load modules
• DCR sensing
HALOGEN
HF
FREE
Environmental Data:
• Storage temperature range: -40°C to +125°C
• Operating temperature range: -40°C to +125°C
(With derated current)
• Solder reflow temperature: J-STD-020D compliant
Packaging:
• Supplied in tape and reel packaging on 13” diameter reel
• FP1007R1 700 parts per reel
• FP1007R2 750 parts per reel
• FP1007R3 650 parts per reel
Part Number⁷
R1 Version
FP1007R1-R12-R
FP1007R1-R14-R
FP1007R1-R17-R
FP1007R1-R22-R
FP1007R1-R30-R
R2 Version
FP1007R2-R12-R
FP1007R2-R14-R
FP1007R2-R17-R
FP1007R2-R22-R
FP1007R2-R30-R
R3 Version
FP1007R3-R12-R
FP1007R3-R15-R
FP1007R3-R17-R
FP1007R3-R22-R
FP1007R3-R23-R
FP1007R3-R27-R
FP1007R3-R30-R
Product Specifications
OCL¹ ± 10% (nH) FLL² Min. (nH) Irms³ (Amps) Isat1⁴ @ 25°C (Amps) Isat2⁵ @ 125°C (Amps) DCR (mΩ) @ 20°C K-factor⁶
120
86
81
140
100
72
170
122
60
58
215
155
50
300
216
32
65
371
56
371
46
0.29 ± 10%
371
36
371
26
371
120
86
81
140
100
72
170
122
51
58
215
155
50
300
216
32
65
368
56
368
46
0.48 ± 8%
368
36
368
26
368
120
86
94
150
108
76
170
122
66
215
155
61
50
230
165
48
270
194
40
300
216
35
86
354
70
354
60
354
43
0.29 ± 8%
354
40
354
34
354
30
354
1 Open Circuit Inductance (OCL) Test Parameters: 100kHz, 0.10Vrms, 0.0Adc
2 Full Load Inductance (FLL) Test Parameters: 100kHz, 0.1Vrms, Isat1
3 Irms: DC current for an approximate temperature rise of 40°C without core loss. Derating is
necessary for AC currents. PCB pad layout, trace thickness and width, air-flow and proximity of
other heat generating components will affect the temperature rise. It is recommended the part
temperature not exceed 125°C under worst case operating conditions verified in the end
application.
4 Isat1: Peak current for approximately 20% rolloff at +25°C.
5 Isat2: Peak current for approximately 20% rolloff at +125°C.
6 K-factor: Used to determine Bp-p for core loss (see graph). Bp-p = K _* L _* ΔI _* 10-3, Bp-p : (Gauss),
K: (K-factor from table), L: (inductance in nH), ΔI (peak-to-peak ripple current in amps).
7 Part Number Definition: FP1007Rx-Rxx-R
• FP1007 = Product code and size
• Rx is the DCR indicator
• Rxx= Inductance value in μH, R = decimal point • “-R” suffix = RoHS compliant
0209 BU-SB09133
Page 1 of 4
Data Sheet: 4341