FHL10U Datasheet, PDF (1/1 Pages) Cooper Bussmann, Inc. – Military Fuseholders Panel Mount-Lamp Indicating

Military Fuseholders
Panel Mount-Lamp Indicating
Dimensional Data
1.19"
(30.2mm)
1.81"
(46.0mm)
Bussmann^®
FHL10U
HGA-C
3.88"
(98.4mm)
.81"
(20.6mm)
CATALOG SYMBOL: FHL10U
LAMP INDICATING
MEETS MILITARY SPECIFICATION - MIL-F-19207/1
NO AGENCY LISTINGS
FOR MILITARY 1/4” x 1-1/4” FUSES:
F02 AND F03 SERIE
COMMERCIAL EQUIVALENT: HGA-C
Specifications
Knob
Clear transparent bayonet type (fuses mount in fuse
clips of a fuse carrier)
Terminals
Threaded stud type; tooth lockwashers and hex nuts.
Enclosure
Unsealed—(FHL10U) IAW MIL-STD-108.
Panel Thickness 0.125 Max.
Rating
30 amperes. 90—250 volts.
Resistor
120,000 ohms.
Body Material
Grey; meets MIL-M-14; fire retardent IAW MIL-STD-454.
Fuse
Style MIL-F-15160 F02, F03 and MIL-F-23419/9 FM09.
Qualified and tested per MIL-F-19207. Group A, B and C.
Mechanical
Shock
MIL-STD-202. Method I.
Terminal Strength 20 lbs.
Torque
15 lbs.-inch.
Drilled Mounting Hole
Dimensional Tolerance ⁺ 0.005" (0.13 mm)
.156" DIA. ⁺ .002"
(4.0mm ⁺ .05mm)
.109" RAD.
(2.8mm)
.105" RAD.
(2.67mm)
.974"
(24.7mm)
.516"
(13.1mm)
.938"
.469" ^(23.8mm)
(11.9mm)
.433"
(11.0mm)
.400"
(10.2mm)
.800"
(20.3mm)
.437" RAD.
(11.0mm)
The only controlled copy of this BIF document is the electronic read-only version located on the Bussmann Network Drive. All other copies of this BIF document are by definition uncontrolled. This bulletin is intended to
clearly present comprehensive product data and provide technical information that will help the end user with design applications. Bussmann reserves the right, without notice, to change design or construction of any
products and to discontinue or limit distribution of any products. Bussmann also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a product has been select-
ed, it should be tested by the user in all possible applications.
12-17-98
SB98107 Rev. A
Form No. FHL10U
Page 1 of 1
BIF Doc #2134