|
CCPB-1-15CF_16 Datasheet, PDF (1/6 Pages) Cooper Bussmann, Inc. – CUBEFuseTM Compact Circuit Protector Base (CCPB) | |||
|
Technical Data 1161
BUSSMANN
Effective April 2016
Supersedes October 2015
SERIES
CUBEFuseTM Compact Circuit Protector Base (CCPB)
Product description:
The revolutionary Bussmann® series Compact
Circuit Protector Base (CCPB) with Bussmann
series CUBEFuse⢠is designed as a fused
branch circuit disconnect switch for the
Bussmann series Quik-Spec⢠Coordination
Panelboard. The CCPB with CUBEFuse
simplifies selective coordination and lockout/
tagout provisions allow for isolation of
individual branch circuit loads for safe work
practices.
Features and benefits:
⢠Uses finger-safe, current-limiting Bussmann
series UL® Class CF CUBEFuse with Class J
performance available, time-delay or
fast-acting versions from 1 to 100 amps*
⢠Patented ampacity rejection feature helps
prevent overfusing
⢠High 200kA short-circuit current ratings
⢠Disconnect rated to provide means for load
isolation
⢠All versions are full voltage rated at 600 Vac
⢠125Vdc rated for 80 A and below
⢠UL 98 Listed and suitable for branch circuit
disconnect
⢠1-, 2- and 3-pole versions are horsepower
rated
⢠Listed to UL and cULus
⢠Open fuse indication light per pole
⢠Additional open fuse indication can be
provided by using the time-delay indicating
CUBEFuse version (6-100 A only)
⢠Built-in switch/fuse interlock prohibits fuse
removal while energized
⢠Permanent lockout/tagout provisions
⢠Lock-ON provision available when used
in the Bussmann series Quik-SpecTM
Coordination Panelboard (QSCP)
* See data sheet No. 9000 for time-delay CUBEFuse
and data sheet No. 2147 for fast-acting CUBEFuse
specifications.
|
▷ |