C5268-1 Datasheet, PDF (1/1 Pages) Cooper Bussmann, Inc. – Fuse Bases (Blocks)

Bussmann^®
Fuse Bases (Blocks)
Modular Style
Bussmann offers a comprehensive line of fuse bases that
provide the user with design and manufacturing flexibility.
Two identical half bases make up a Buss modular fuse base.
These “split” units can be panel mounted any distance apart
to accommodate any length fuse.
Stud Type
Stud Type
The simpler design is the C5268 series modular fuse base.
With this design, the fuse terminal and cable (with termination)
are mounted on the same stud, minimizing labor needed for
installation. The stud type base is available in the configuration
shown in the table below.
Part No.
C5268-1
C5268-2
C5268-3
C5268-4
C5268-5
Max. Fuse
Current Rating
200A
200A
200A
100A
100A
Stud
Heights
1.00∑
1.75∑
0.75∑
1.00∑
1.75∑
Stud Dia.
& Threads
fiΩ¡§-18
fiΩ¡§-18
fiΩ¡§-18
⁄Ω¢-20
⁄Ω¢-20
Connector Type
Connector Type
Bussmann also offers a modular style fuse base that utilizes a
tin-plated connector (for wire termination and heat dissipation)
and a plated-steel stud (for fuse mounting). The connector
type fuse base is available in the configurations shown below.
Consult Bussmann for additional product details.
Modular
Base Style
1BS101
1BS102
1BS103
1BS104
BH-0xxx
BH-1xxx
BH-2xxx
BH-3xxx
Max.
Voltage
600V
600V
600V
600V
700V
2500V
5000V
1250V
Max. Fuse
Current Rating
100A
400A
400A
600A
100A
400A
400A
700A
BIF
Document
1206
1207
1208
1209
1200
1201
1202
1203
Fixed Center
Fixed Center Base Style
Bussmann offers a comprehensive line of fixed mount style
fuse bases under the trademark TRON^® rectifier fuseblocks.
The cable and fuse connections are similar to the stud type
fuse base — both are mounted on the same stud. Consult
Bussmann for complete product details.
The only controlled copy of this BIF document is the electronic read-only version located on the Bussmann Network Drive. All other copies of this document are by definition uncontrolled.
This bulletin is intended to clearly present comprehensive product data and provide technical information that will help the end user with design applications. Bussmann reserves the right,
without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Bussmann also reserves the right to change or update, without
notice, any technical information contained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications.
7-11-01
SB01191
Form No.
Page 1 of 1
BIF Doc #720033