BBS-1 Datasheet, PDF (1/1 Pages) Cooper Bussmann, Inc. – Fast-Acting Ferrule Fuses

Fast-Acting Ferrule Fuses
13/32” x 1-3/8”
Bussmann^®
BBS
Dimensional Data
1.38"
(±0.031)
Time-Current Characteristic Curves–Average Melt
AMPERE
RATING
100
10
0.41"
(±0.004)
Catalog Symbol: BBS
1
Fast-Acting
1/10 TO 30A
Interrupting Rating: 10 KA
UL Listed, STD. 248-14
0-5A/600Vac OR LESS, 6-10A/250Vac
(GUIDE #JDYX, FILE #E19180)
.1
CSA CERTIFIED, C22.2 NO. 248.14
0-5A/600V, 6-10A/250Vac
(CLASS #1422-01, FILE #53787)
Electrical Ratings (Catalog Symbol and Amperes)
600Vac
250Vac
BBS-1/10
BBS-1
BBS-6
BBS-2/10
BBS-1-1/2
BBS-7
BBS-1/4
BBS-1-6/10
BBS-8
BBS-4/10
BBS-1-8/10
BBS-10
BBS-1/2
BBS-2
—
BBS-6/10
BBS-3
—
BBS-3/4
BBS-4
—
BBS-8/10
BBS-5
—
48Vac
BBS-12
BBS-15
BBS-20
BBS-25
BBS-30
—
—
—
CE logo denotes compliance with European Union Low Voltage Directive
(50-1000Vac, 75-1500Vdc). Refer to Data Sheet: 8002 or contact
Bussmann Application Engineering at 636-527-1270 for more information.
Recommended fuseblocks/fuseholders for
13/32” x 1-1/2” fuses
See Data Sheets listed below
• Open fuseblocks - 1104, 2104
• Finger-safe fuseholders - 1109, 1102, 1103, 1151
• Panel-mount fuseholders - 2114, 2113, 2108,
2112, 2109, 2140
• In-line fuseholders - 2127, 2126
.01
CURRENT IN AMPERES
• For control circuits, gaseous vapor fixture, HID ballasts;
electronic circuits and hand-held meters.
• Fibre Tube.
• Nickel Plated Brass Endcaps.
The only controlled copy of this Data Sheet is the electronic read-only version located on the Bussmann Network Drive. All other copies of this Data Sheeti are by definition uncontrolled. This bulletin is intended to clear-
ly present comprehensive product data and provide technical information that will help the end user with design applications. Bussmann reserves the right, without notice, to change design or construction of any prod-
ucts and to discontinue or limit distribution of any products. Bussmann also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a product has been selected,
it should be tested by the user in all possible applications.
10-2-02
SB02295
Form No. BBS
Page 1 of 1
Data Sheet: 2010