68000 Datasheet, PDF (1/1 Pages) List of Unclassifed Manufacturers – 16-/32-Bit Microprocessor

Welder Limiters
Class H and J Fuseholders
Catalog Symbol: 68150, 68200, 68300, 68400, 68600,
64200, 64300, 64400, and 64600
Welder Limiters
Voltage Rating: 600 Volts AC or less; 200,000 AIC
Bussmann^®
68000 & 64000
Series
General Information:
• Current-limiting devices designed specially for use on welder
circuits only.
• Time-current characteristics are designed to hold on the inter-
mittent overloading encountered in welder operation, while pro-
viding short-circuit protection to the circuit and equipment.
• Welder limiters have excess current capacity in the operating
range as needed for this type of service.
• Because of the special characteristics of the welder limiters,
they are not intended for application on general-use circuits.
Dimensional Data
A
K
B
J
C
E
D
G
F
H
Type
Catalog Amp Rating
Fuseholder Number
(Nominal)
A
B
C
68150
68200
150
9.63 —
—
200
Class H
68300
68400
300
11.63 —
—
400
68600
600
13.38 —
—
64200
200
5.75 3.0
4.38
Class J
64300
64400
300
7.125 3.38 5.25
400
7.125 3.38 5.25
64600
600
8.0 3.75 6.0
Dimensions in Inches
D
E
F
G
H
J
K
1.5
3.31 —
1.25 0.19
—
—
Carton
Qty.
1
Weight
Lbs. Kg.
1.40
0.63
2.0
4.31 —
1.63 0.25
—
—
2.5
5.16 —
2.0 0.25
—
—
1.5
1.38 0.69 1.125 0.19 0.28 0.38
2.0
1.88 0.94 1.63 0.25 0.41 0.53
2.0
1.88 0.94 1.63 0.25 0.41 0.53
2.5
2.125 1.0 2.0 0.38 0.53 0.34
1
2.75
1.25
1
4.25
1.92
1
1.00
0.45
1
1.75
0.79
1
1.75
0.79
1
3.50
1.59
The only controlled copy of this BIF document is the electronic read-only version located on the Bussmann Network Drive. All other copies of this document are by definition uncontrolled. This bulletin
is intended to clearly present comprehensive product data and provide technical information that will help the end user with design applications. Bussmann reserves the right, without notice, to change
design or construction of any products and to discontinue or limit distribution of any products. Bussmann also reserves the right to change or update, without notice, any technical information con-
tained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications.
12-28-98
SB98107 Rev. A
Form No. Welder Limiter
Page 1 of 1
BIF Doc #1045